Boston Acoustics Speaker BA4800 User Manual

TM  
BA4800  
Powered Speaker System  
4-Channel Surround Configuration  
 
1. Front Speaker Assembly  
1
a) Connect the left front speaker's plug into the jack  
on the rear of the right front speaker, (NOTE: satellite  
speaker with audio controls should be on the right side  
of your video monitor).  
b) Making sure speaker cables are free, slide on front  
speaker pedestal stands.  
c) Attach rubber pads to bottom tips of each pedestal  
stand. The rubber pads absorb vibrations between the  
speakers and the desktop for a cleaner sound.  
b
a
c
2. Input Panel Connections  
a) Connect the right front  
satellite's control cable (blue) to the  
"Control" jack (blue) on the back of  
the subwoofer.  
2
Right front speaker  
b) Connect each of the audio  
input cables (2 ea.) to your PC's  
sound card. "Front Analog in"  
(green) on the back of the sub-  
woofer to the front analog output  
on the sound card (usually labeled  
"front", "1" or green). "Rear Analog  
in" (purple) on subwoofer connects  
with control pod  
a
to the sound card's rear analog  
output (usually labeled "rear", "2"  
b
or black).  
Back of subwoofer  
Back of computer  
SCALE  
0.500  
Apply subwoofer's rubber pads to each corner  
3. Rear Speaker Assembly  
3
a) First, snap on the slide caps to  
the top of each tower tube. Then feed  
the connection cord from each  
speaker down through the tube. Next,  
slide each satellite speaker on to top of  
tower tube, making sure the cords are  
not being pinched. Finally, with the  
cord passing through the bottom of  
the tower tube, slide on each of the  
three stability legs. The cord should  
pass freely through the intersection of  
the three stability legs.  
21  
a
b
b) With each of the two tower speaker  
Back of subwoofer  
cords passing down through the tubes,  
SCALE  
0.500  
connect each plug to the respective  
right and left "Rear Speaker" jacks on  
the back of the subwoofer (red to red  
and white to white).  
c
c) Plug in power cable/transformer into  
Stability legs  
back of subwoofer and available AC outlet.  
 
Limited Warranty  
For one year from the date of purchase, Boston Acoustics will repair for the original owner any defect in  
materials or workmanship that occurs in normal use of the speaker system, without charge for parts and labor.  
Your responsibilities are to use the system according to the instructions supplied, to provide safe and  
secure transportation to an authorized Boston Acoustics service representative and to present proof of  
purchase in the form of your sales slip when requesting service.  
Excluded from this warranty is damage that may result from abuse, misuse, accidents, shipping, or repairs  
or modifications by anyone other than an authorized Boston Acoustics service representative.  
This warranty is void if the serial number has been removed or defaced.  
This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.  
If Service Seems Necessary  
Please contact the retailer from whom you purchased the system. If that is not possible, write to:  
Boston Acoustics, Inc., 300 Jubilee Drive, Peabody, MA 01960, or call 1-(978)-538-5000.  
We will promptly advise you of what action to take. If it is necessary to return your speaker to the factory,  
please ship it prepaid. After it has been repaired, we will return it freight prepaid in the U.S. and Canada.  
Notice of FCC Compliance  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
-- Reorient or relocate the receiving antenna  
-- Increase the separation between the equipment and receiver  
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  
-- Consult the dealer or an experienced radio/TV technician for help  
© Copyright 1999 Boston Acoustics, Inc. All rights  
reserved. BA4800 is a trademark and MagnaGuard,  
Boston, and Boston Acoustics are registered  
trademarks of Boston Acoustics, Inc.  
300 Jubilee Drive  
Peabody, MA 01960  
(978) 538-5000  
Specifications subject to change without notice.  
Part# 042-001133-0  
 

Bosch Power Tools Cordless Saw CCS180B User Manual
Bosch Power Tools Drill 1191VSRK User Manual
Breville Bread Maker BBM800XL User Manual
Briggs Stratton Lawn Mower 20E200 User Manual
Caframo Fan 797CA GCS User Manual
Candy Washer CN105T User Manual
Canon Camcorder 8455B003 User Manual
Carrier Air Conditioner 42VMC User Manual
Char Broil Gas Grill 466270611 User Manual
Chevrolet Automobile 2010 Equinox User Manual