Bosch Appliances Security Camera WZ18 User Manual

Integrated IR Bullet Camera  
WZ18  
en Installation Manual  
 
Integrated IR Bullet Camera  
Table of Contents | en  
3
Table of Contents  
1
Safety  
5
5
6
7
14  
1.1  
1.2  
1.3  
1.4  
Important safety instructions  
Important safety instructions  
Important notices  
Customer Support and Service  
2
3
4
Features  
16  
17  
18  
Box Contents  
Camera Parts and Adjustments  
5
5.1  
5.2  
Installation  
Mounting Position  
Monitor Connection  
19  
19  
20  
6
7
Dimensions  
21  
22  
Specifications  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
4
en | Table of Contents  
Integrated IR Bullet Camera  
8
8.1  
8.2  
OSD Manual  
Lens Menu  
23  
23  
23  
24  
24  
24  
25  
25  
25  
26  
26  
26  
27  
27  
28  
28  
29  
30  
Exposure Menu  
White Balance Menu  
Day & Night Menu  
Image Menu  
3DNR Balance Menu  
Special Menu  
Reset Menu  
OSD Function Description  
Lens  
8.3  
8.4  
8.5  
8.6  
8.7  
8.8  
8.9  
8.9.1  
8.9.2  
8.9.3  
8.9.4  
8.9.5  
8.9.6  
8.9.7  
8.9.8  
Exposure  
White Balance  
Day and Night  
Image  
3DNR  
Special  
Reset  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Safety | en  
5
1
Safety  
1.1 Important safety instructions  
WARNING!  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE  
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONELL.  
WARNING!  
This is a class A product. In a domestic environment this product  
may cause radio interference in which case the user may be  
required to take adequate measures.  
CAUTION!  
Any changes or modifications in construction of this device  
which are not expressly approved by the party responsible  
for compliance could void the user’s authority to operate the  
equipment.  
CAUTION!  
These servicing instructions are for use by qualified service  
personnel only.  
To reduce the risk of electric shock do not perform any servicing  
other than that contained in the operating instructions unless you  
are qualified to do so.  
In USA and Canada, use a Class 2 power supply only.  
NOTICE!  
After adjusting zoom and focus, to prevent water infiltration,  
firmly tighten the zoom and focus lever. (Rep: 10) When you  
install the camera, please glue up the end of cable to  
keep it stable in order to protect the camera from the humidity  
problems. (Rep: 11)  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
6
en | Safety  
Integrated IR Bullet Camera  
1.2 Important Safety Instructions  
1.  
2.  
3.  
4.  
5.  
Read these instructions.  
Keep this instruction.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
6.  
7.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in  
accordance with manufacturer instructions.  
8.  
9.  
Do not install near any heat sources such as radiators, heat  
registers, stoves or other apparatus (including amplifiers)  
that produce heat.  
Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade or the  
third prong is provided for your safety. If the provided plug  
does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the  
power where they exit from the apparatus.  
11. Only use attachments/accessories specified by the  
manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Safety | en  
7
14. Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in a  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
1.3 Important Safety Instructions  
CAUTION!  
1.  
A regulated DC12V 1A power supply is recommended for  
use with this camera for the best picture and the most  
stable operation. An unregulated power supply can cause  
damage to the camera. When unregulated power supply is  
applied, product warranty will be out of subject.  
It is recommended that the camera is used with a monitor  
that has a CCTV quality 75 Ohm video impedance level. If  
your monitor is switched to high impedance then please  
adjust accordingly.  
2.  
3.  
4.  
Do not attempt to disassemble the camera to gain access  
to the internal compounds. Refer servicing to your dealer.  
Never face the camera towards the sun or any bright or  
reflective light, which may cause smear on the picture and  
possible damage to the CCD.  
5.  
Do not remove the serial sticker for the warranty service.  
All-pole power switch - Incorporate an all-pole power switch,  
with a contact separation of at least 3 mm in each pole, into the  
electrical installation of the building. If it is needed to open the  
housing for servicing and/or other activities, use this all-pole  
switch as the main disconnect device for switching off the  
voltage to the unit.  
Camera grounding - For mounting the camera in potentially  
damp environments, ensure to ground the system using the  
ground connection of the power supply connector (see section:  
Connecting external power supply).  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
8
en | Safety  
Integrated IR Bullet Camera  
Camera lens - An assembled camera lens in the outdoor  
housing must comply and be tested in accordance with UL/  
IEC60065. Any output or signal lines from the camera must be  
SELV or Limited Power Source. For safety reasons the  
environmental specification of the camera lens assembly must  
be within the environmental specification of -10 °C (14 °F) to  
50 °C (122 °F).  
Camera signal - Protect the cable with a primary protector if  
the camera signal is beyond 140 feet, in accordance with  
NEC800 (CEC Section 60).  
Coax grounding:  
– Ground the cable system if connecting an outside cable  
system to the unit.  
– Connect outdoor equipment to the unit’s inputs only after  
this unit has had its grounding plug connected to a  
grounded outlet or its ground terminal is properly  
connected to a ground source.  
– Disconnect the unit’s input connectors from outdoor  
equipment before disconnecting the grounding plug or  
grounding terminal.  
– Follow proper safety precautions such as grounding for  
any outdoor device connected to this unit.  
U.S.A. models only - Section 810 of the National Electrical Code,  
ANSI/NFPA No.70, provides information regarding proper  
grounding of the mount and supporting structure, grounding of  
the coax to a discharge unit, size of grounding conductors,  
location of discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
Disposal - Your Bosch product was developed and  
manufactured with high-quality material and components that  
can be recycled and reused. This symbol means that electronic  
and electrical appliances, which have reached the end of their  
working life, must be collected and disposed of separately from  
household waste material. Separate collecting systems are  
usually in place for disused electronic and electrical products.  
Please dispose of these units at an environmentally compatible  
recycling facility, per European Directive 2002/96/EC.  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Safety | en  
9
Electronic Surveillance - This device is intended for use in  
public areas only. U.S. federal law strictly prohibits  
surreptitious recording of oral communications.  
Environmental statement - Bosch has a strong commitment  
towards the environment. This unit has been designed to  
respect the environment as much as possible.  
Electrostatic-sensitive device - Use proper CMOS/MOS-FET  
handling precautions to avoid electrostatic discharge.  
NOTE: Wear required grounded wrist straps and observe proper  
ESD safety precautions when handling the electrostaticsensitive  
printed circuit boards.  
Fuse rating - For security protection of the device, the branch  
circuit protection must be secured with a maximum fuse rating  
of 16A. This must be in accordance with NEC800 (CEC Section  
60).  
Moving - Disconnect the power before moving the unit. Move  
the unit with care. Excessive force or shock may damage the  
unit and the hard disk drives.  
Outdoor signals - The installation for outdoor signals, especially  
regarding clearance from power and lightning conductors and  
transient protection, must be in accordance with NEC725 and  
NEC800 (CEC Rule 16-224 and CEC Section 60).  
Permanently connected equipment - Incorporate a readily  
accessible disconnect device in the building installation wiring.  
Pluggable equipment - Install the socket outlet near the  
equipment so it is easily accessible.  
Power resupply - If the unit is forced to power down due to  
exceeding the specified operating temperatures, disconnect  
the power cord, wait for at least 30 seconds, and then  
reconnect the power cord.  
Power lines - Do not locate the camera near overhead power  
lines, power circuits, or electrical lights, nor where it may  
contact such power lines, circuits, or lights.  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.comInst.alAlatilolnMMaanunaluals Search And Download.  
10  
en | Safety  
Integrated IR Bullet Camera  
Rack-mount  
– Ventilation - Do not place this unit in a built-in installation  
or rack without proper ventilation or adhering to the  
manufacturer’s instructions. The equipment must not  
exceed its maximum operating temperature requirements.  
– Mechanical loading - Properly mount the equipment in a  
rack to prevent a hazardous condition due to uneven  
mechanical loading.  
SELV  
All the input/output ports are Safety Extra Low Voltage (SELV)  
circuits. SELV circuits should only be connected to other SELV  
circuits.  
Because the ISDN circuits are treated like telephone-network  
voltage, avoid connecting the SELV circuit to the Telephone  
Network Voltage (TNV) circuits.  
The system ground is only used to comply with safety standards  
or installation practices in certain countries. Bosch does not  
recommend connecting system ground to safety ground unless  
it is explicitly required. However, if the system ground and  
safety ground are connected and grounding loops are causing  
interference in the video signal, use an isolation transformer  
(available separately from Bosch).  
CAUTION!  
Connecting System ground to Safety ground may result in  
ground loops that can disrupt the CCTV system.  
Video loss - Video loss is inherent to digital video recording;  
therefore, Bosch Security Systems cannot be held liable for any  
damage that results from missing video information. To  
minimize the risk of lost digital information, Bosch Security  
Systems recommends multiple, redundant recording systems,  
and a procedure to back up all analog and digital information.  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Safety | en  
11  
FCC & ICES Information  
(U.S.A. and Canadian Models Only)  
This equipment has been tested and found to comply with the  
limits for a Class A digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a commercial  
environment. This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following  
measures:  
– reorient or relocate the receiving antenna;  
– increase the separation between the equipment and  
receiver;  
– connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected;  
– consult the dealer or an experienced radio/TV technician  
for help.  
Intentional or unintentional modifications, not expressly  
approved by the party responsible for compliance, shall not be  
made. Any such modifications could void the user’s authority to  
operate the equipment. If necessary, the user should consult  
the dealer or an experienced radio/television technician for  
corrective action.  
The user may find the following booklet, prepared by the  
Federal Communications Commission, helpful: How to Identify  
and Resolve Radio-TV Interference Problems. This booklet is  
available from the U.S. Government Printing Office,  
Washington, DC 20402, Stock No. 004-000-00345-4.  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
12  
en | Safety  
Integrated IR Bullet Camera  
INFORMATIONS FCC ET ICES  
(modèles utilisés aux États-Unis et au Canada uniquement)  
Suite à différents tests, cet appareil s’est révélé conforme aux  
exigences imposées aux appareils numériques de classe A, en  
vertu de la section 15 du règlement de la Commission fédérale  
des communications des États-Unis (FCC), et en vertu de la  
norme ICES-003 d’Industrie Canada. Ces exigences visent à  
fournir une protection raisonnable contre les interférences  
nuisibles lorsque l’appareil est utilisé dans le cadre d’une  
environnement commercial. Cet appareil génère, utilise et émet  
de l’énergie de radiofréquences et peut, en cas d’installation ou  
d’utilisation non conforme aux instructions, engendrer des  
interférences nuisibles au niveau des radiocommunications.  
Toutefois, rien ne garantit l’absence d’interférences dans une  
installation particulière. Il est possible de déterminer la  
production d’interférences en mettant l’appareil  
successivement hors et sous tension, tout en contrôlant la  
réception radio ou télévision. Lutilisateur peut parvenir à  
éliminer les interférences éventuelles en prenant une ou  
plusieurs des mesures suivantes:  
Modifier l’orientation ou l’emplacement de l’antenne  
réceptrice;  
Éloigner l’appareil du récepteur;  
Brancher l’appareil sur une prise située sur un circuit  
différent de celui du récepteur;  
Consulter le revendeur ou un technicien qualifié en radio/  
télévision pour obtenir de l’aide.  
Toute modification apportée au produit, non expressément  
approuvée par la partie responsable de l’appareil, est  
strictement interdite. Une telle modification est susceptible  
d’entraîner la révocation du droit d’utilisation de l’appareil.  
La brochure suivante, publiée par la Commission fédérale des  
communications (FCC), peut s’avérer utile : How to Identify and  
Resolve Radio-TV Interference Problems (Comment identifier et  
résoudre les problèmes d’interférences de radio et de télévision).  
Cette brochure est disponible auprès du U.S. Government  
Printing Office, Washington, DC 20402, États-Unis, sous la  
référence n° 004-000-00345-4.  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Safety | en  
13  
Disclaimer  
Underwriter Laboratories Inc. (“UL) has not tested the  
performance or reliability of the security or signaling aspects of  
this product. UL has only tested fire, shock and/or casualty  
hazards as outlined in ULs Standard(s) for Safety for Audio,  
Video and Similar Electronic Apparatus. Safety Requirements UL  
60065. UL Certification does not cover the performance or  
reliability of the security or signaling aspects of this product.  
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR  
CERTIFICATIONS WHATSOEVER REGARDING THE  
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR  
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.  
Copyright  
This manual is the intellectual property of Bosch Security  
Systems and is protected by copyright.  
All rights reserved.  
Trademarks  
All hardware and software product names used in this  
document are likely to be registered trademarks and must be  
treated accordingly.  
NOTE!  
This manual has been compiled with great care and the  
information it contains has been thoroughly verified. The text  
was complete and correct at the time of printing. The ongoing  
development of the products may mean that the content of the  
user guide can change without notice. Bosch Security Systems  
accepts no liability for damage resulting directly or indirectly  
from faults, incompleteness or discrepancies between the user  
guide and the product described.  
More information  
For additional information, please contact the Bosch Security  
Systems location nearest you or visit our web site at  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
14  
en | Safety  
Integrated IR Bullet Camera  
1.4 Customer Support and Service  
If this unit needs service, contact the nearest Bosch Security  
Systems Service Center for authorization to return and shipping  
instructions.  
Service Centers  
USA  
Repair Center-  
Telephone: 800-566-2283  
Fax: 800-366-1329  
Customer Service  
Telephone: 888-289-0096  
Fax: 585-223-9180  
Technical Support  
Telephone: 800-326-1450  
Fax: 585-223-3508 or 717-735-6560  
Canada  
Telephone: 514-738-2434  
Fax: 514-738-8480  
Europe, Middle East, Africa Region  
Repair Center  
Telephone: 31 (0) 76-5721500  
Fax: 31 (0) 76-5721413  
Asia Region  
Repair Center  
Telephone: 65 63522776  
Fax: 65 63521776  
Customer Service  
Telephone: 86 (0) 756 7633117 or  
86 (0) 756 7633121  
Fax: 86 (0) 756 7631710  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Safety | en  
15  
Warranty and more information  
For additional information and warranty queries, please contact  
your Bosch Security Systems representative or visit our website  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
16  
en | Features  
Integrated IR Bullet Camera  
2
Features  
Excellent image quality under all conditions  
– High resolution 540 TVL image  
– Dual window design, eliminating IR glare  
– Suitable for indoor and outdoor use (IP66 rated)  
Designed for day and night vision  
– 1/3-in. Super-HAD CCD II sensor  
– 20 IR LED’s providing 20 meters of vision in complete  
darkness and with adjustable output power  
– Day/Night function, automatically switching between day  
(color) mode and night (black/white with IR) modes  
Advanced digital video processing  
– 10-bit image processing  
– Digital Noise Reduction (DNR) for optimum night time  
images  
– Privacy mask function allows blanking of specific areas of  
the scene  
– Multi language On-screen Display (OSD) control, allowing  
camera configuration on the monitor screen  
Easy to install  
– Mounting bracket included with cable feed-through  
– External focus and zoom control (no need to dismantle the  
camera)  
– Universal 12 VDC or 24 VAC power input  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Box Contents | en  
17  
3
Box Contents  
WZ18 Bullet Camera  
Sunshield  
Video Output Test Cable  
L-Wrench  
Screws (3)  
Sunshield Fixing Bolt  
Operation Manual  
(this book)  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
18  
en | Camera Parts and Adjustments  
Integrated IR Bullet Camera  
4
Camera Parts and Adjustments  
1
2
3
4
Sunshield Fixing Bolt  
Sunshield  
5
Photo cell  
Body  
Body Fixing Ring  
External Zoom and Focus Adjustment  
6
7
8
Mounting Bracket  
LEDs (20)  
External Zoom and Focus Controls  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Installation | en  
19  
5
Installation  
5.1 Mounting Position  
WARNING!  
To prevent injury, this apparatus must be securely attached to  
the floor/wall in accordance with the installation instructions.  
360˚  
90˚  
360˚  
CAUTION!  
After adjusting the zoom and focus, firmly tighten the zoom and  
focus lever to seal the camera against water ingress.  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
20  
en | Installation  
Integrated IR Bullet Camera  
5.2 Mounting Connection  
CAUTION!  
To prevent humidity problems, the camera must be installed in  
dry conditions, and the cable leads should be sealed once  
connected.  
1
2
3
4
5
DC 12V / AC 24V  
BNC Female  
DC 12V / AC 24V Power Supply  
Video In  
TV Monitor  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
Dimensions | en  
21  
6
Dimensions  
82  
130  
120  
224  
M12 XP1.0  
mm  
(in.)  
Ф65  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.comInst.alAlatilolnMMaanunaluals Search And Download.  
22  
en | Specifications  
Integrated IR Bullet Camera  
7
Specifications  
NTSC  
PAL  
Image Sensor  
Total Pixels (H x V)  
Effective Pixels (H x V)  
Inter. H/V (H, V)  
Horizontal Resolution  
S/N Ration  
1/3 in. Super HAD CCD II  
811 x 508  
768 x 494  
795 x 596  
752 x 582  
15.734 KHz, 59.94 Hz  
15.625 KHz, 50 Hz  
540 TV Lines  
> 50 dB (AGC Off)  
Internal  
Sync. System  
Gamma  
r=0.05 ~ 1.0 Adjustable / USER  
1.0 Vp-p Composite (75 Ohm)  
Varifocal  
Video Output  
Lens  
Electronic Shutter  
Manual Shutter  
1/60 sec.  
1/50 sec.  
1/60(50), FLK, 1/250, 1/500, 1/2K, 1/5K, 1/10K,  
1/100K X2, X4, X8, X16, X32, X64, X128, X256  
Sense-up  
AGC  
Off / Auto (X2, X4, X8, X16, X32, X64, X128, X256)  
Off / Low / Middle / High  
BLC  
Off / BLC / HSBLC  
White Balance  
Day and NIght  
Motion Detection  
Privacy Zone  
3-DNR  
ATW / PUSH / PUSH-LOCK / MANUAL / INDOOR / OUTDOOR  
True Day and Night With ICR Mechanism  
Zone 4ea (Mask On / Off)  
Zone 8ea (Mask On / Off)  
Off / On (0~100 Level Adjustable)  
Off / Indoor / Outdoor  
D-WDR  
Image  
Freeze / Mirror / D-zoom / Sharpness / Color gain /  
Gamma / NEG.Image  
IR LED  
850 nm, 20 each, Up to 30 m (98.4 ft)  
Adjustable(4 step)  
IR LED Operation  
IP Rating  
IP66 (Waterproof)  
Operating Temperature  
Storage Temperature  
Power Consumption  
Weight  
-10˚C ~ +50˚C (14˚F~122˚F)  
-20˚C ~ +60˚C (-4˚F~140˚F)  
AC24V ±10% Max 6.7W, DC12V ±10% Max 570mA  
Approx. 1000g (2.2 lbs)  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
OSD Manual | en  
23  
8
OSD Manual  
8.1 Lens Menu  
LENS  
DC  
BRIGHTNESS  
1~100  
EXPOSURE  
WHITE BAL  
DAY NIGHT  
IMAGE  
3DNR  
SPECIAL  
RESET  
EXIT  
8.2 Exposure Menu  
LENS  
SHUTTER  
X256 ~1/100K  
EXPOSURE  
AGC  
LOW, MIDDLE, HIGH  
X2 ~ X256  
WHITE BAL  
SENSE-UP  
GAIN, LEFT/RIGHT, WIDTH,  
TOP/BOTTOM, HEIGNT  
DAY NIGHT  
BLC  
BLC  
IMAGE  
HSBLC  
LEVEL, LEFT/RIGHT, WIDTH,  
TOP/BOTTOM, HEIGNT  
3DNR  
D-WDR  
INDOOR, OUTDOOR  
SPECIAL  
RESET  
EXIT  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
24  
en | OSD Manual  
Integrated IR Bullet Camera  
8.3  
White Balance Menu  
LENS  
EXPOSURE  
WHITE BAL  
ATW  
PUSH  
DAY NIGHT  
IMAGE  
P-LOCK  
3DNR  
MANUAL  
BLUE 1~ 100  
SPECIAL  
INDOOR  
RED 1~ 100  
RESET  
OUTDOOR  
EXIT  
8.4  
Day & Night Menu  
LENS  
EXPOSURE  
WHITE BAL  
DAY NIGHT  
AUTO  
D&N LEVEL  
BURST  
0~ 3  
IMAGE  
B/W  
ON / OFF  
3DNR  
COLOR  
SPECIAL  
RESET  
EXIT  
8.5  
Image Menu  
LENS  
FREEZE  
ON/OFF  
EXPOSURE  
MIRROR  
MIRROR  
x1 ~ x32  
0 ~ 31  
V-FLIP  
ROATE  
WHITE BAL  
D-ZOOM  
PAN -100~100  
TILT -100~100  
DAY NIGHT  
SHARPNESS  
COLOR GAIN  
IMAGE  
BLUE 1 ~100  
0.05~1  
RED 1 ~100  
3DNR  
GAMMA  
SPECIAL  
NEG.IMAGE  
ON/OFF  
RESET  
EXIT  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
OSD Manual | en  
25  
8.6  
8.7  
8.8  
3DNR Balance Menu  
LENS  
EXPOSURE  
WHITE BAL  
DAY NIGHT  
IMAGE  
3DNR  
ON  
LEVEL  
1 ~ 100  
SPECIAL  
RESET  
EXIT  
Special Menu  
CAM TITLE  
ON/OFF  
POSITION CONTROL  
LENS  
EXPOSURE  
LANGUAGE  
ENGLISH  
FRENCH  
RUSSIAN  
GRRMAN  
DEUTSCH  
DUTCH  
WHITE BAL  
LEFT /  
RIGHT  
MOTION  
ON/OFF  
AREA SEL  
AREA DISPLAY  
WIDTH  
TOP / BOTTOM  
HEIGHT  
DAY NIGHT  
SENSITIVITY  
IMAGE  
MOTION  
VIEW  
AREA 1~4  
ON/OFF  
3DNR  
PRIVACY  
AREA SEL  
SPECIAL  
AREADISPLAY  
LEFT/RIGHT  
WIDTH  
COLOR  
TOP/BOTTOM  
AREA 1~8  
ON/OFF  
HEIGHT  
RESET  
SYNC  
INT  
EXIT  
Reset Menu  
LENS  
EXPOSURE  
WHITE BAL  
DAY NIGHT  
IMAGE  
3DNR  
SPECIAL  
RESET  
FACTORY RESET  
EXIT  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
26  
en | OSD Manual  
Integrated IR Bullet Camera  
8.9  
OSD Function Description  
8.9.1  
Lens  
– BRIGHTNESS: Adjusts the image brightness (1~100).  
LENS  
BRIGHTNESS  
RETURN  
60  
RET  
8.9.1 Exposure  
EXPOSURE  
SHUTTER  
AGC  
SENSE-UP  
BLC  
1/60  
MIDDLE  
OFF  
OFF  
D-WDR  
RETURN  
OFF  
RET┛  
– SHUTTER  
– FLK: Adjusts FLICKERLESS setting.  
(NTSC: 1/100, PAL: 1/120)  
– FIXED: Adjusts the Shutter Speed.  
> 1/60(50), 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K.  
* ( ) is for PAL TYPE.  
– BRIGHTNESS: Adjusts the MANUAL Electronic Shutter  
value.  
– AGC: Adjusts the Automatic Gain Control.  
– SENSE-UP: Low-speed shutter control.  
– BLC: Back Light Compensation.  
– HSBLC: Highlight Suppression BLC (darkens parts of  
the image to enhance the scene).  
– D-WDR: Dynamic-wide Dynamic Range allows every detail  
to be captured accurately even if one portion is bright  
while other portions are dark.  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
OSD Manual | en  
27  
8.9.3  
White Balance  
Adjust to display accurate white color by controlling the RGB  
level.  
WHITE BAL MANUAL  
BLUE  
RED  
24  
32  
RETURN  
RET┛  
– ATW: Traces the White Balance automatically.  
(2,500K ~ 9,500K)  
– PUSH: Traces the White Balance automatically.  
– P-LOCK: Automatically readjusted at the request of the user.  
– MANUAL: Sets the RED GAIN or BLUE GAIN.  
– INDOOR: Sets base mode to 3,200K.  
– OUTDOOR: Sets base mode to 5,400K.  
8.9.4 Day and Night  
Determines the switching moment between Color and B/W  
mode.  
DAY & NIGHT AUTO  
D&N LEVEL  
RETURN  
---l----- 1  
RET┛  
– AUTO: Sensor mode auto change.  
* Adjustable for variable D&N change timing.  
– D&N Level “1: Turn LED on with B/W mode @ 4Lux /  
Turn LED Off with Color Mode @ 7Lux  
– The Higher D&N Level turns into Black & White mode  
at higher luminous intensity and vice versa.  
* The D&N change timing could be affected by installation circumstances.  
– B/W: Fixes the output image in B/W.  
• BURST ON/OFF: Select the burst signal ON/OFF when  
Night condition.  
– COLOR: Fixes the output image in COLOR.  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
28  
en | OSD Manual  
Integrated IR Bullet Camera  
8.9.5  
Image  
Sets the FREEZE, MIRROR, D-ZOOM, SHARPNESS, COLOR  
GAIN, GAMMA, NEGATIVE IMAGE.  
IMAGE  
FREEZE  
MIRROR  
D-ZOOM  
SHARPNESS  
COLOR GAIN  
GAMMA  
NEG.IMAGE  
RETURN  
OFF  
OFF  
OFF  
17  
0.45  
OFF  
RET┛  
– FREEZE: Sets moving images in freeze-frame mode.  
– MIRROR  
– MIRROR: Sets reversed LEFT and RIGHT image.  
– V-FLIP: Sets vertically flipped video.  
– ROTATION: Sets rotation up to 180 degrees.  
– D-ZOOM: Expands one part of the monitor screen for viewing.  
– SHARPNESS: Sets sharpness control.  
– COLOR GAIN: Sets the RED GAIN or BLUE GAIN.  
– GAMMA: Sets compensation according to the gamma value.  
– NEG.IMAGE: Sets negative image ON/OFF.  
8.9.6 3DNR  
Sets three-dimensional noise reduction.  
– LEVEL: Sets noise reduction level.  
3DNR  
LEVEL  
RETURN  
50  
RET┛  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
Integrated IR Bullet Camera  
OSD Manual | en  
29  
8.9.7  
Special  
Sets the CAM TITLE, LANGUAGE, MOTION, PRIVACY, SYNC.  
SPECIAL  
CAM TITLE  
LANGUAGE  
MOTION  
PRIVACY  
SYNC  
OFF  
ENGLISH  
OFF  
OFF  
INT  
RETURN  
RET┛  
– CAMERA TITLE: Displays the title editing menu.  
– LANGUAGE: Sets language for the OSD.  
– MOTION: The camera monitors the movement of image,  
and it sends an alarm signal or OSD icon.  
– AREA SELECT: Select one of the four (4) motion areas.  
– AREA DISPLAY: Turns display ON/OFF in the selected area.  
– LEFT/RIGHT: Sets LEFT/RIGHT position in the selected area.  
– WIDTH: Sets the width in the selected area.  
– TOP/BOTTOM: Sets TOP/BOTTOM position in the selected area.  
– HEIGHT: Sets the height in the selected area.  
– SENSITIVITY: Sets the movement detection threshold value.  
– MOTION VIEW: Displays the motion area on the screen.  
– PRIVACY: Masks user-defined areas of the view.  
– AREA SELECT: Select the mask area from 1 to 8.  
– AREA DISPLAY: Toggle mask ON/OFF in selected area.  
– LEFT/RIGHT: Sets LEFT/RIGHT position in selected area.  
– WIDTH: Sets width in selected area.  
– TOP/BOTTOM: Sets TOP/BOTTOM position in selected area.  
– HEIGHT: Sets the height in selected area.  
– COLOR: Select mask color.  
– SYNC: Synchronizes the image from the camera and the monitor.  
– INT: Internal synchronization system.  
Installation Manual  
| 1.0 | 2011.01  
DBoowschnSleocuaridty Sfyrsotemms,WInc.ww.Somanuals.com. All Manuals Search And Download.  
30  
en | OSD Manual  
Integrated IR Bullet Camera  
8.9.8  
Reset  
Resets all settings to the factory default.  
RESET  
FACTORY  
RETURN  
RESET┛  
RET┛  
Installation Manual  
Bosch Security Systems, Inc.  
| 1.0 D| 20o1w1.0n1 load from Www.Somanuals.com. All Manuals Search And Download.  
 
Bosch Security Systems, Inc.  
850 Greenfield Road  
Lancaster, PA 17601  
U.S.A.  
© Bosch Security Systems, Inc., 2011  
 

Belkin Mouse G700 Series User Manual
Belkin Network Router F7D4302AU User Manual
Black Box Computer Hardware CAT5 Shielded Twisted Pair STP Patch Cable User Manual
Black Box Computer Hardware HDMCII VDSL2 LAN Extender Module Extended Temp User Manual
Blanco Indoor Furnishings 157 134 User Manual
Bowers Wilkins Speaker LCR3 User Manual
Bushnell Binoculars 13 Jul User Manual
Bushnell Binoculars 131054 User Manual
Bushnell Telescope 78 9540 User Manual
Carrier Air Conditioner 39L User Manual