WMB 751241 LA
Washing Machine
TABLE OF CONTENTS
1 Your washing machine
4
Main programmes . . . . . . . . . . . . . . . 18
Additional programmes . . . . . . . . . . . . 18
Temperature selection . . . . . . . . . . . . . 20
Spin speed selection . . . . . . . . . . . . . . 20
Programme and consumption table. . . 21
Auxiliary function selection. . . . . . . . . . 23
Time display . . . . . . . . . . . . . . . . . . . . 24
Starting the programme. . . . . . . . . . . . 24
Progress of programme. . . . . . . . . . . . 25
Loading door lock . . . . . . . . . . . . . . . . 25
Changing the selections after programme
has started . . . . . . . . . . . . . . . . . . . . . 25
Child Lock. . . . . . . . . . . . . . . . . . . . . . 25
Cancelling the programme. . . . . . . . . . 26
Machine is in Rinse Hold mode . . . . . . 26
End of programme . . . . . . . . . . . . . . . 26
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical specifications . . . . . . . . . . . . . 5
2 Important safety
instructions
6
General safety . . . . . . . . . . . . . . . . . . . . 6
Intended use . . . . . . . . . . . . . . . . . . . . . 6
Children's safety . . . . . . . . . . . . . . . . . . 7
3 Installation
8
Appropriate installation location . . . . . . . 8
Removing packaging reinforcement. . . . 8
Removing the transportation locks. . . . . 8
Connecting water supply. . . . . . . . . . . . 9
Connecting to the drain . . . . . . . . . . . . . 9
Adjusting the feet. . . . . . . . . . . . . . . . . 10
Electrical connection . . . . . . . . . . . . . . 10
First use . . . . . . . . . . . . . . . . . . . . . . . 11
Disposing of packaging material . . . . . 11
Transportation of the product. . . . . . . . 11
Disposing of the old product . . . . . . . . 11
6 Maintenance and cleaning27
Cleaning the detergent drawer. . . . . . . 27
Cleaning the loading door and the
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the body and control panel . . 27
Cleaning the water intake filters . . . . . . 27
Draining remaining water and cleaning the
pump filter . . . . . . . . . . . . . . . . . . . . . . 28
4 Preparation
12
Things to be done for energy saving . . 12
Sorting the laundry . . . . . . . . . . . . . . . 12
Preparing laundry for washing . . . . . . . 12
Correct load capacity . . . . . . . . . . . . . 13
Loading the laundry. . . . . . . . . . . . . . . 13
Using detergent and softener . . . . . . . 14
Tips for efficient washing . . . . . . . . . . . 16
7 Troubleshooting
30
5 Operating the product
17
Control panel. . . . . . . . . . . . . . . . . . . . 17
Display symbols. . . . . . . . . . . . . . . . . . 18
Preparing the machine. . . . . . . . . . . . . 18
Programme selection. . . . . . . . . . . . . . 18
3
EN
1 Your washing machine
Overview
8
1
2
3
7
6
4
5
1- Power cable
2- Top panel
3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door
7- Detergent drawer
8- Drain hose
4
EN
Technical specifications
Models
WMB 751241 LA
7.5
Maximum dry laundry capacity (kg)
Height (cm)
84
60
59
Width (cm)
Depth (cm)
73
220-240 V / 50Hz
10
Net weight ( 4 kg.)
Electrical input (V/Hz)
Total current (A)
Total power (W)
Spin speed (rpm max.)
2000-2350
1200
Technical specifications may be changed without prior notice to improve the quality of
the product.
C
Figures in this manual are schematic and may not match the product exactly.
Values stated on the product labels or in the documentation accompanying it
are obtained in laboratory conditions in accordance with the relevant standards.
Depending on operational and environmental conditions of the product, these values
may vary.
C
C
5
EN
2 Important safety instructions
This section contains safety instructions
that will help protect from risk of personal
injury or property damage. Failure to follow
these instructions shall void any warranty.
by a qualified electrician. Our company
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with
the local regulations.
The water supply and draining hoses
must be securely fastened and remain
undamaged. Otherwise, there is the
risk of water leakage.
Never open the loading door or remove
the filter while there is still water in the
drum. Otherwise, risk of flooding and
injury from hot water will occur.
Do not force open the locked loading
door. The loading door will be ready
to open just a few minutes after the
washing cycle comes to an end.
In case of forcing the loading door
to open, the door and the lock
mechanism may get damaged.
Unplug the product when not in use.
Never wash the product by spreading
or pouring water onto it! There is the
risk of electric shock!
General safety
•
•
This product should not be used
by persons with physical, sensory
or mental disorders or unlearned
or inexperienced people (including
children) unless they are attended by
a person who will be responsible for
their safety or who will instruct them
accordingly for use of the product.
8 years and older children and people
with reduced physical, sensory, and
mental abilities as well as unskilled
or inexperienced persons can use
this appliance provided that they are
supervised and instructed on safe
use of the appliance as well as to the
related dangers. Children should not
play or tamper with the appliance.
Cleaning and user maintenance should
never be performed by children unless
supervised by a responsible adult.
Never place the product on a carpet-
covered floor; otherwise, lack of
airflow beneath the machine will cause
electrical parts to overheat. This will
cause problems with your product.
Do not operate the product if the
power cable / plug is damaged. Call a
qualified electrician.
•
•
•
•
•
•
•
Never touch the plug with wet hands!
Never unplug by pulling on the cable,
always pull out by grabbing the plug.
Use detergents, softeners and
supplements suitable for automatic
washing machines only.
Follow the instructions on the textile
•
•
•
•
•
•
tags and on the detergent package.
The product must be unplugged during
installation, maintenance, cleaning and
repairing procedures.
Always have the installation and
repairing procedures carried out
by the Authorized Service Agent.
Manufacturer shall not be held liable
for damages that may arise from
procedures carried out by unauthorized
persons.
Have a qualified electrician connect
a 16-Ampere fuse to the installation
location of the product.
If the product has a failure, it should not
be operated unless it is repaired by the
Authorized Service Agent. There is the
•
risk of electric shock!
•
•
This product is designed to resume
operating in the event of powering on
after a power interruption. If you wish to
cancel the programme, see "Cancelling
the programme" section.
Intended use
•
This product has been designed for
domestic use. It is not suitable for
commercial use and it must not be
used out of its intended use.
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Do not neglect to
have the grounding installation made
•
The product must only be used for
washing and rinsing of laundry that are
marked accordingly.
6
EN
•
The manufacturer waives any
responsibility arisen from incorrect
usage or transportation.
Children's safety
•
Electrical products are dangerous for
the children. Keep children away from
the product when it is in use. Do not
let them to tamper with the product.
Use child lock to prevent children from
intervening with the product.
•
•
Do not forget to close the loading
door when leaving the room where the
product is located.
Store all detergents and additives in a
safe place away from the reach of the
children.
7
EN
3 Installation
It is the customers responsibility to arrange
a suitably qualified installer to correctly
install this product. To make the product
ready for use, review the information in
the user manual and make sure that the
electricity, tap water supply and water
drainage systems are appropriate before
calling the qualified Installer. If they are not,
call a qualified technician and plumber to
have any necessary arrangements carried
out.
Removing packaging
reinforcement
Tilt the machine backwards to remove
the packaging reinforcement. Remove the
packaging reinforcement by pulling the
ribbon.
Preparation of the location and
C
electrical, tap water and waste water
installations at the place of installation
is under customer's responsibility.
Installation and electrical connections
B
of the product must be carried out by
a qualified installer. Manufacturer shall
not be held liable for damages that may
arise from procedures carried out by
unauthorized persons.
Prior to installation, visually check if
A
the product has any defects on it. If
so, do not have it installed. Damaged
products cause risks for your safety.
Removing the
transportation locks
Do not remove the transportation
Make sure that the water inlet and
A
C
locks before taking out the packaging
reinforcement.
discharge hoses as well as the power
cable are not folded, pinched or
crushed while pushing the product into
its place after installation or cleaning
procedures.
Remove the transportation safety
A
bolts before operating the washing
machine, otherwise, the product will be
damaged.
Appropriate installation location
1. Loosen all the bolts with a spanner until
they rotate freely (C).
•
Place the machine on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
Total weight of the washing machine
and the dryer -with full load- when
they are placed on top of each other
reaches to approx. 180 kilograms.
Place the product on a solid and flat
floor that has sufficient load carrying
capacity!
•
2. Remove transportation safety bolts by
turning them gently.
•
•
•
Do not place the product on the power
cable.
Do not install the product at places
where temperature may fall below 0ºC.
Place the product at least 1 cm away
from the edges of other furniture.
8
EN
3. Attach the plastic covers supplied in
the User Manual bag into the holes on
the rear panel. (P)
Keep the transportation safety bolts in
C
a safe place to reuse when the washing
machine needs to be moved again in
the future.
Ensure that the cold and hot water
connections are made correctly when
installing the product. Otherwise, your
laundry will come out hot at the end of
the washing process and wear out.
A
Never move the product without the
transportation safety bolts properly
fixed in place!
C
2. Tighten all hose nuts by hand. Never
use a wrench when tightening the nuts.
Connecting water supply
The water supply pressure required
C
to run the product is between 1 to 10
bars (0.1 – 1 MPa). It is necessary to
have 10 – 80 liters of water flowing
from the fully open tap in one minute
to have your machine run smoothly.
Attach a pressure reducing valve if
water pressure is higher.
If you are going to use the double
C
3. Open the taps completely after making
the hose connection to check for
water leaks at the connection points.
If any leaks occur, turn off the tap and
remove the nut. Retighten the nut
carefully after checking the seal. To
prevent water leakages and damages
caused by them, keep the taps closed
when the machine is not in use.
water-inlet product as a single (cold)
water-inlet unit, you must install the
supplied stopper to the hot water valve
before operating the product. (Applies
for the products supplied with a blind
stopper group.)
If you want to use both water inlets
C
of the product, connect the hot water
hose after removing the stopper and
gasket group from the hot water valve.
(Applies for the products supplied with
a blind stopper group.)
Connecting to the drain
•
The end of the drain hose must be
directly connected to the wastewater
drain or to the washbasin.
Models with a single water inlet should
A
Your house will be flooded if the
hose comes out of its housing during
water discharge. Moreover, there is
risk of scalding due to high washing
temperatures! To prevent such
situations and to ensure smooth water
intake and discharge of the machine,
fix the end of the discharge hose tightly
so that it cannot come out.
not be connected to the hot water
tap. In such a case the laundry will get
damaged or the product will switch to
protection mode and will not operate.
A
Do not use old or used water inlet
A
hoses on the new product. It may
cause stains on your laundry.
1. Connect the special hoses supplied
with the product to the water inlets
on the product. Red hose (left) (max.
90 ºC) is for hot water inlet, blue hose
(right) (max. 25 ºC) is for cold water
inlet.
•
The hose should be attached to a
height of at least 60 cm, and 90 cm at
most.
9
EN
•
In case the hose is elevated after
laying it on the floor level or close to
the ground (less than 60 cm above the
ground), water discharge becomes
more difficult and the laundry may
come out excessively wet. Therefore,
follow the heights described in the
figure.
the hose must not be pinched between
the drain and the machine.
•
If the length of the hose is too short,
use it by adding an original extension
hose. Length of the hose may not be
longer than 3.2 m. To avoid water leak
failures, the connection between the
extension hose and the drain hose of
the product must be fitted well with an
appropriate clamp as not to come off
and leak.
Adjusting the feet
In order to ensure that the product
A
operates more silent and vibration-free,
it must stand level and balanced on its
feet. Balance the machine by adjusting
the feet. Otherwise, the product
may move from its place and cause
crushing and vibration problems.
1. Loosen the lock nuts on the feet by
hand.
2. Adjust the feet until the product stands
level and balanced.
3. Tighten all lock nuts again by hand.
Do not use any tools to loosen the lock
A
•
•
To prevent flowing of dirty water back
into the machine and to allow for easy
discharge, do not immerse the hose
end into the dirty water or drive it in the
drain more than 15 cm. If it is too long,
cut it short.
nuts. Otherwise, they will get damaged.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the "Technical specifications"
table. Our company shall not be liable
for any damages that will arise when the
The end of the hose should not be
bent, it should not be stepped on and
10
EN
product is used without grounding in
accordance with the local regulations.
Some water might have remained in
the product due to the quality control
processes in the production. It is not
harmful for the product.
C
•
•
•
Connection must comply with national
regulations.
Power cable plug must be within easy
reach after installation.
The voltage and allowed fuse or
breaker protection are specified in the
“Technical specifications” section. If the
current value of the fuse or breaker in
the house is less than 16 Amps, have
a qualified electrician install a 16 Amp
fuse.
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in a
safe place away from reach of the children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort
in accordance with recycled waste
instructions. Do not dispose of them with
normal domestic waste.
Transportation of the product
1. Unplug the product before transporting
it.
2. Remove water drain and water supply
connections.
3. Drain the remaining water in the
product completely; see, "Draining
remaining water and cleaning the pump
filter".
4. Install transportation safety bolts in the
reverse order of removal procedure;
see, "Removing the transportation
locks".
•
•
The specified voltage must be equal to
your mains voltage.
Do not make connections via extension
cables or multi-plugs.
Damaged power cables must be
replaced by the Authorized Service
Agents.
B
First use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections "Important safety instructions" and
"Installation".
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If your machine is not
featured with Drum Cleaning programme,
use Cottons-90 programme and select
Additional Water or Extra Rinse auxiliary
functions as well. Before starting the
programme, put max. 100 g of powder
anti-limescale into the main wash detergent
compartment (compartment nr. II). If the
anti-limescale is in tablet form, put only
one tablet into compartment nr. II. Dry the
inside of the bellow with a clean piece of
cloth after the programme has come to an
end.
Never move the product without the
transportation safety bolts properly
fixed in place!
C
Disposing of the old product
Dispose of the old product in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your product.
For children's safety, cut the power cable
and break the locking mechanism of the
loading door so that it will be nonfunctional
before disposing of the product.
Use an anti-limescale suitable for the
washing machines.
C
11
EN
4 Preparation
Things to be done for
energy saving
Following information will help you use
the product in an ecological and energy-
efficient manner.
Wash with sensitive,
.short programmes
Washing water
temperature
•
Operate the product in the highest
capacity allowed by the programme
you have selected, but do not overload;
see, “Programme and consumption
table”.
Do not use bleach
Bleach can be
used
•
•
•
•
Always follow the instructions on the
detergent packaging.
Wash slightly soiled laundry at low
temperatures.
Use faster programmes for small
quantities of lightly soiled laundry.
Do not use prewash and high
temperatures for laundry that is not
heavily soiled or stained.
Suitable for drier
Do not dry with drier
Hang without
spinning
Can be ironed with
hot iron
•
•
If you plan to dry your laundry in a
dryer, select the highest spin speed
recommended during washing
process.
Do not use detergent in excess of
the amount recommended on the
detergent package.
Non machine-washable
Do not wash
Do not dry-clean
Dry on a hanger
Dry-cleanable
Sorting the laundry
•
Sort laundry according to type of
fabric, colour, and degree of soiling and
allowable water temperature.
Always obey the instructions given on
the garment tags.
Dry horizontally
•
Can be ironed
with warm iron
Do not iron
Preparing laundry for washing
•
Laundry items with metal attachments
such as, underwired bras, belt buckles
or metal buttons will damage the
machine. Remove the metal pieces or
wash the clothes by putting them in a
laundry bag or pillow case.
12
EN
and the washing programme desired.
The machine automatically adjusts the
amount of water according to the weight of
the loaded laundry.
Follow the information in the
A
“Programme and consumption table”.
When overloaded, machine’s washing
performance will drop. Moreover, noise
and vibration problems may occur.
Laundry types and their average weights in
the following table are given as examples.
•
Take out all substances in the pockets
such as coins, pens and paper clips,
and turn pockets inside out and brush.
Such objects may damage the product
or cause noise problem.
Put small size clothes such as infant’s
socks and nylon stockings in a laundry
bag or pillow case.
Place curtains in without compressing
them. Remove curtain attachment
items.
Fasten zippers, sew loose buttons and
mend rips and tears.
Wash “machine washable” or “hand
washable” labeled products only with
an appropriate programme.
Do not wash colours and whites
together. New, dark coloured cottons
release a lot of dye. Wash them
separately.
Tough stains must be treated properly
before washing. If unsure, check with a
dry cleaner.
Use only dyes/colour changers
and limescale removers suitable for
machine wash. Always follow the
instructions on the package.
Laundry type
Bathrobe
Napkin
Weight (g)
1200
100
•
•
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
700
500
200
250
200
•
•
Hand towel
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pajamas
Blouses
100
200
100
600
200
500
100
•
Loading the laundry
•
•
•
•
Open the loading door.
Place laundry items loosely into the
machine.
•
Push the loading door to close until you
hear a locking sound. Ensure that no
items are caught in the door.
The loading door is locked while a
programme is running. The door
can only be opened a while after the
programme comes to an end.
In case of misplacing the laundry, noise
and vibration problems may occur in
the machine.
•
•
Wash trousers and delicate laundry
turned inside out.
C
Keep laundry items made of Angora
wool in the freezer for a few hours
before washing. This will reduce pilling.
Laundry that are subjected to materials
such as flour, lime dust, milk powder,
etc. intensely must be shaken off
before placing into the machine. Such
dusts and powders on the laundry
may build up on the inner parts of
the machine in time and can cause
damage.
A
•
Correct load capacity
The maximum load capacity depends on
the type of laundry, the degree of soiling
13
EN
•
When washing dark coloured clothes
and quilts, it is recommended to use
liquid detergent.
Wash woolens with special detergent
made specifically for woolens.
Use only detergents manufactured
specifically for washing machines.
Using detergent and softener
Detergent Drawer
The detergent drawer is composed of three
compartments:
•
- (1) for prewash
A
- (2) for main wash
– (3) for softener
ADo not use soap powder.
– (*) in addition, there is siphon piece in the
softener compartment.
Adjusting detergent amount
The amount of washing detergent to be
used depends on the amount of laundry,
the degree of soiling and water hardness.
Read the manufacturer’s instructions on
the detergent package carefully and follow
the dosage values.
3
1
3
2
1
2
•
Do not use amounts exceeding the
dosage quantities recommended
on the detergent package to avoid
problems of excessive foam, poor
rinsing, financial savings and finally,
environmental protection.
Use lesser detergent for small amounts
or lightly soiled clothes.
Use concentrated detergents in the
recommended dosage.
The detergent dispenser may be in two
different types according to the model
of your machine as seen above.
C
Detergent, softener and other cleaning
•
•
agents
•
•
•
Add detergent and softener before
starting the washing programme.
Never open the detergent drawer while
the washing programme is running!
When using a programme without
prewash, do not put any detergent
into the prewash compartment
(compartment nr. I).
Using softeners
Pour the softener into the softener
compartment of the detergent drawer.
•
•
•
Use the dosages recommended on the
package.
Do not exceed the (>max<) level
marking in the softener compartment.
If the softener has lost its fluidity, dilute
it with water before putting it in the
detergent drawer.
•
•
In a programme with prewash, do not
put liquid detergent into the prewash
compartment (compartment nr. I).
Do not select a programme with
prewash if you are using a detergent
bag or dispensing ball. Place the
detergent bag or the dispensing ball
directly among the laundry in the
machine.
If you are using liquid detergent, do
not forget to place the liquid detergent
cup into the main wash compartment
(compartment nr. II).
Using liquid detergents
If the product contains a liquid
detergent cup:
•
Make sure that you have placed the
liquid detergent cup in compartment nr.
“II”.
Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Use the dosages recommended on the
package.
•
•
Choosing the detergent type
The type of detergent to be used depends
on the type and colour of the fabric.
•
•
•
Use different detergents for coloured
and white laundry.
Wash your delicate clothes only with
special detergents (liquid detergent,
wool shampoo, etc.) used solely for
delicate clothes.
If the liquid detergent has lost its fluidity,
dilute it with water before putting in the
detergent cup.
•
14
EN
detergent between the laundry, close
to the lower part of the drum in future
washings.
Use the tablet or gel detergent without
selecting the prewash function.
C
Using starch
•
Add liquid starch, powder starch or the
dyestuff into the softener compartment
as instructed on the package.
Do not use softener and starch
together in a washing cycle.
Wipe the inside of the machine with
a damp and clean cloth after using
starch.
•
•
Using bleaches
•
If the product does not contain a liquid
detergent cup:
Select a programme with prewash
and add the bleaching agent at the
beginning of the prewash. Do not put
detergent in the prewash compartment.
As an alternative application, select a
programme with extra rinse and add
the bleaching agent while the machine
is taking water from the detergent
compartment during first rinsing step.
Do not use bleaching agent and
detergent by mixing them.
Use just a little amount (approx. 50
ml) of bleaching agent and rinse the
clothes very well as it causes skin
irritation. Do not pour the bleaching
agent onto the clothes and do not use
it for coloured clothes.
•
Do not use liquid detergent for the
prewash in a programme with prewash.
Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Liquid detergent stains your clothes
when used with Delayed Start function.
If you are going to use the Delayed
Start function, do not use liquid
detergent.
•
•
•
•
Using gel and tablet detergent
When using tablet, gel, etc. detergents,
read the manufacturer’s instructions on
the detergent package carefully and
follow the dosage values. If there is not
any instruction on the package, apply the
following.
•
•
When using oxygen based bleaches,
follow the instructions on the package
and select a programme that washes
at a lower temperature.
Oxygen based bleaches can be used
together with detergents; however,
if its thickness is not the same with
the detergent, put the detergent first
into the compartment nr. “II” in the
detergent drawer and wait until the
detergent flows while the machine
is taking in water. Add the bleaching
agent from the same compartment
while the machine is still taking in water.
•
If the gel detergent thickness is fluidal
and your machine does not contain
a special liquid detergent cup, put
the gel detergent into the main wash
detergent compartment during first
water intake. If your machine contains
a liquid detergent cup, fill the detergent
into this cup before starting the
programme.
If the gel detergent thickness is not
fluidal or in the shape of capsule liquid
tablet, put it directly into the drum
before washing.
•
•
Using limescale remover
•
Put tablet detergents into the main
wash compartment (compartment
nr. II) or directly into the drum before
washing.
When required, use limescale removers
manufactured specifically for washing
machines only.
Always follow instructions on the
package.
•
Tablet detergents may leave residues
in the detergent compartment. If you
encounter such a case, place the tablet
C
15
EN
Tips for efficient washing
Clothes
Colors
(Recommended
Light colours and
whites
Delicates/
Woolens/Silks
Dark colors
(Recommended (Recommended
(Recommended
temperature
range based
temperature
range based
temperature range temperature range
based on soiling
level: 40-90C)
based on soiling level:
cold-40C)
on soiling level: on soiling level:
cold-40C)
cold-30C)
It may be
necessary to pre-
treat the stains of
perform prewash.
Powder and
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
liquid detergents
recommended
for whites can be
used at dosages
recommended
for heavily soiled
clothes. It is
Liquid
Prefer liquid
detergents
produced for
detergents
suitable for
Heavily Soiled
heavily soiled clothes. colours and dark delicate clothes.
(difficult stains
such as grass,
coffee, fruits
and blood.)
It is recommended
to use powder
colours can be Woollen and silk
used at dosages clothes must
recommended be washed with
for heavily soiled special woollen
detergents to clean
clay and soil stains
recommended
to use powder
and the stains that are clothes.
detergents.
detergents to clean sensitive to bleaches.
clay and soil stains Use detergents
and the stains that without bleach.
are sensitive to
bleaches.
Powder and
Liquid
Prefer liquid
detergents
produced for
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
normally soiled
clothes. Use
Normally Soiled
detergents
suitable for
liquid detergents
recommended
for whites can be
used at dosages
recommended for
normally soiled
clothes.
colours and dark delicate clothes.
colours can be Woollen and silk
used at dosages clothes must
recommended be washed with
for normally
soiled clothes.
(For example,
stains caused
by body on
collars and
cuffs)
special woollen
detergents.
detergents without
bleach.
Powder and
Liquid
Prefer liquid
detergents
produced for
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
detergents
suitable for
liquid detergents
recommended
for whites can be
used at dosages
recommended for
Lightly Soiled
colours and dark delicate clothes.
colours can be Woollen and silk
used at dosages clothes must
(No visible
stains exist.)
lightly soiled clothes. recommended be washed with
lightly soiled clothes. Use detergents
without bleach.
for lightly soiled special woollen
clothes. detergents.
16
EN
5 Operating the product
Control panel
1
2
3
4
5
6
7
8
1
-
-
-
-
-
-
-
-
Spin Speed Adjustment button
Display
Temperature Adjustment button
Programme Selection knob
On / Off button
Delayed Start buttons (+ / -)
Auxiliary Function buttons
Start / Pause / Cancel button
2
3
4
5
6
7
8
17
EN
temperature.
Display symbols
Always select the lowest required
temperature. Higher temperature
means higher power consumption.
For further programme details, see
"Programme and consumption table".
C
C
Main programmes
Depending on the type of fabric, use the
following main programmes.
• Cottons
F3
F2
F1
F4
Use this programme for your durable
whites and colourfast cotton clothes. This
programme is suggested for washing
heavily soiled items.
• Easy Care
a
b
c
d
e
- Spin Speed indicator
- Temperature indicator
- Spin symbol
- Temperature symbol
- Remaining Time and Delayed Start
indicator
Use this programme to wash your
synthetic or blended clothes (shirts,
blouses,synthetic/cotton blends, etc.).
It washes with a gentle action and has
a shorter washing cycle compared to
Cottons programme.
f
- Programme Indicator symbols
(Prewash / Main Wash / Rinse /
Softener / Spin)
For curtains and tulle, use the easy
care 40˚C programme with prewash
and easy iron functions selected. As
their meshed texture causes excessive
foaming, wash the veils/tulle by putting little
amount of detergent into the main wash
compartment. Do not put detergent in the
prewash compartment.
g
h
i
j
k
l
- Economy symbol
- Delayed Start symbol
- Door Locked symbol
- Start symbol
- Pause symbol
- Auxiliary Function symbols
No Water symbol
• Wool
Use this programme to wash your
“machine washable” woollens. Check the
care label of your clothes for appropriate
temperature selection. It is recommended
to use special detergents approved for
woollens.
m -
Preparing the machine
1. Make sure that the hoses are
connected tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
• Cottons Eco
You may wash your normally soiled whites
and light coloured cotton clothes in this
programme. This programme ensures the
highest energy and water saving compared
to all other wash programmes suitable for
cottons.
Programme selection
1. Select the programme suitable for
the type, quantity and soiling degree
of the laundry in accordance with the
• Mix
"Programme and consumption table"
2. Select the desired programme with the
Programme Selection button.
Use this programme to wash your cotton,
synthetic or blended clothes together.
Additional programmes
For special cases, additional programmes
are available in the machine.
Programmes are limited with the
C
highest spin speed appropriate for that
particular type of fabric.
Additional programmes may differ
according to the model of the machine.
When selecting a programme, always
C
C
consider the type of fabric, colour,
degree of soiling and permissible water
18
EN
• Allergy
This programme is designed to minimize
the detergent residue on clothes. It is
recommended to wash clothes of people
with sensitive skins (e.g. babies). Longer
heating time and an additional rinse provide
a higher level of hygiene.
• Delicates
Use this programme to wash delicate
clothes such as silk & viscose
undergarments and lingerie. Remove any
non-washable items and accessories from
laundry before washing. Place small items
(e.g. bras, stockings) in a washing bag.
This programme is also recommended to
wash your delicate clothes that bear “not
machine washable” tags and for which
hand wash is recommended.
Do not wash cotton/feather filled
pillows or duvets in the machine.
Do not wash carpets and rugs in your
machine. This might cause permanent
damage on your machine.
C
A
• Daily Quick
• Self Clean
Use this programme to wash your lightly
soiled clothes.
• Quick 14’
This special cycle provides better machine
hygiene by heating the water up to
70ºC. During the Self Clean program,
the detergent drawer, pipes, drum and
tub receive the necessary cleaning
automatically. This special cycle program
cleans the tub while it is empty to ensure
that residuals do not accumulate in the tub
after the wash
Use this programme to wash a few number
of lightly soiled clothes worn for a short
time.
• Jeans
Use this programme to wash your dark
coloured and coloured clothes without
fading them. You can also wash your
normally or lightly soiled jeans and
denim jackets in this programme. It
is recommended to use special liquid
detergents suitable for coloured/dark
coloured clothes.
• Rinse
Use this programme when you want to
rinse or starch separately.
• Drain+Spin
Use this programme to apply an additional
spin cycle for your laundry or to drain the
water in the machine. Before selecting this
programme, select the desired spin speed
and press Start / Pause button. First, the
machine will drain the water inside of it.
Then, it will spin the laundry with the set
spin speed and drain the water coming out
of them. If you wish to drain only the water
without spinning your laundry, select the
Drain+Spin programme and then select
the No Spin function with the help of Spin
Speed Adjustment button. Press Start /
Pause button.
• Shirts
Use this programme to wash cotton,
synthetic or blended business shirts and
blouses.
• Sports
Use this programme to wash your cotton,
synthetics or blended sportswear (shorts,
T-shirts, tracksuits etc).
• Bedding/Blanket
Use this programme to wash your bedding
items (pillows or cushions with polyester
filling, bedspreads) and blankets. Make
sure that all items are “machine washable”
and loaded correctly not to damage the
machine (e.g. Fold the blanket into two or
more and pay attention to load it in a way
that it will not touch the door gasket)
Use a lower spin speed for delicate
items.
C
19
EN
Then, depending on the model of the
product, "Rinse Hold" and "No Spin"
options appear on the display. See
"Auxiliary function selection" section for
explanations of these options.
Temperature selection
Whenever a new programme is selected,
the maximum temperature for the
selected programme appears on the
temperature indicator.
CRinse Hold option is indicated with “
To decrease the temperature, press
the Temperature Adjustment button.
Temperature decreases with increments
of 10° and finally, “-” symbol is indicated
on the temperature display.
” symbol and No Spin option is
indicated with “ ” symbol.
Cold Wash Option
This option is available, when “-“ symbol
appears on the temperature display. Cold
Wash option is selectable at all of the
washing programs. By the help of this,
Cold wash can be done at each of the
laundry types, special to the selected
programme. You will save energy for your
lightly soiled items, while using this option.
If you scroll to cold wash option and
C
press Temperature Adjustment button
again, the recommended temperature
for the selected programme appears
on the display. Press the Temperature
Adjustment button again to decrease
the temperature.
Economy symbol
Indicates the programmes and
temperatures that provide energy savings.
Spin speed selection
Whenever a new programme is selected,
the recommended spin speed of the
selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press
the Spin Speed Adjustment button.
Spin speed decreases gradually.
20
EN
Programme and consumption table
EN
2
Auxiliary functions
Selectable
temperature
range °C
Programme (°C)
Cottons
90
60
40
90
7.5
7.5
7.5
7.5
87
85
85
80
65
65
55
55
55
50
60
40
70
70
80
56
95
45
110
60
2.7
1600
1600
1600
1600
1600
1600
1200
1200
1200
1200
1200
1400
1400
1400
1400
1200
1200
800
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
90-Cold
90-Cold
90-Cold
90-30
Cottons
1.80
1.00
2.70
1.12
0.44
1.00
0.52
0.62
0.25
0.60
0.10
2.02
1.20
0.30
0.30
0.60
0.60
2.70
0.25
Cottons
Allergy
Cottons Eco
Cottons Eco
Easy Care
Easy Care
Mixed 40 (Mix 40)
Delicate
40** 7.5
Cold 7.5
40-Cold
40-Cold
60-Cold
60-Cold
40-Cold
30-Cold
60-40
60
40
40
30
40
30
90
60
30
40
40
40
70
40
4
4
•
•
•
•
•
•
•
•
•
•
•
•
4
1
Bedding/Blanket
Quick 14’
Daily/Quick
Daily/Quick
Daily/Quick
Wool
-
2
•
•
•
•
•
•
•
30-Cold
90-Cold
90-Cold
90-Cold
40-Cold
40-Cold
60-Cold
70
7.5
7.5
7.5
2
Jeans
4
Shirts
4
•
•
*
Self Clean
Sports
-
800
4
1200
•
•
40-Cold
21
EN
• : Selectable
* : Automatically selected, no cancelling.
** : Energy and water labelling test programme in accordance with AS/NZS 2040.
*** If maximum spin speed of the machine is lower then this value, you can only select
up to the maximum spin speed.
- : See the programme description for maximum load.
The auxiliary functions in the table may vary according to the model of your
C
machine.
Water and power consumption may vary subject to the changes in water pressure,
C
water hardness and temperature, ambient temperature, type and amount of
laundry, selection of auxiliary functions and spin speed, and changes in electric
voltage.
You can see the washing time of the programme you have selected on the display
of the machine. It is normal that small differences may occur between the time
shown on the display and the real washing time.
C
22
EN
F2 appears on the display when you select
this function (b).
Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you
may also select or cancel auxiliary functions
that are suitable to the running programme
by pressing the Start / Pause / Cancel
button when the machine is operating. For
this, the machine must be in a step before
the auxiliary function you are going to
select or cancel.
Depending on the programme, press a, b,
c or d buttons to select the desired auxiliary
function. Symbol of the selected auxiliary
function appears on the display.
When you select this function, load
C
your machine with half of the maximum
laundry specified in the programme
table.
• Rinse Plus
This function enables the machine to
make another rinsing in addition to the one
already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic
skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be
reduced.
F3 appears on the display when you select
this function (c).
• Easy Iron
This function creases the clothes lesser
when they are being washed. Drum
movement is reduced and spinning speed
is limited to prevent creasing. In addition,
washing is done with a higher water level.
F4 appears on the display when you select
this function (d).
a
b
c
d
• Rinse Hold
Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the
function selected first will be canceled
and the second auxiliary function
selection will remain active. For
example, if you want to select Quick
Wash after you have selected the
Prewash, Prewash will be canceled and
Quick Wash will remain active.
C
C
If you are not going to unload your
clothes immediately after the programme
completes, you may use rinse hold
function to keep your laundry in the final
rinsing water in order to prevent them
from getting wrinkled when there is no
water in the machine. Press Start / Pause
/Cancel button after this process if you
want to drain the water without spinning
your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in
water, adjust the Spin Speed and press
Start / Pause / Cancel button.
An auxiliary function that is not
compatible with the programme cannot
be selected. (See "Programme and
consumption table")
The programme resumes. Water is drained,
laundry is spun and the programme is
completed.
CAuxiliary Function buttons may vary
according to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
F1 appears on the display when you select
this function (a).
• Soaking
The Soaking auxiliary function ensures
better removal of stains ingrained into the
clothes by holding them in the detergent
water prior to startup of the programme.
• Quick
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of
rinsing steps for lightly soiled laundry.
23
EN
• Pet hair removal
Additional laundry may be loaded
during the delayed start period. At the
end of the countdown, Delayed Start
symbol disappears, washing cycle
starts and the time of the selected
programme appears on the display.
C
This function helps to remove pet hair that
remain on your garments more effectively.
When you select this function, Prewash
and Extra Rinse steps are added to the
normal programme. Thus, washing is
performed with more water (30%) and the
pet hair is removed more effectively.
Changing the delayed start period
If you want to change the time during
countdown:
1. Press Start / Pause / Cancel button.
“:” sign in the middle of the delayed
start time on the display stops flashing.
Pause symbol appears. Delayed
Start symbol flashes. Start symbol
disappears.
Never wash your pets in the washing
machine.
A
Time display
Remaining time to complete the
programme appears on the display while
the programme is running. Tim is displayed
as “01:30” in hours and minutes format.
2. Set the desired delayed start time
by pressing the Delayed Start + or -
buttons.
3. Press Start / Pause / Cancel button.
Delayed Start symbol illuminates
steadily. Pause symbol disappears.
Start symbol appears.
4. “:” sign in the middle of the delayed
start time on the display starts flashing.
Cancelling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Press Start / Pause / Cancel button. “:”
sign in the middle of the delayed start
time on the display stops flashing.
2. Start symbol disappears. Pause
symbol and Delayed Start symbol
flashes.
3. Decrease the delayed start time by
pressing the Delayed Start - button.
Programme duration appears after 30
minutes.
Programme time may differ from
C
the values in the "Programme and
consumption table" depending on the
water pressure, water hardness and
temperature, ambient temperature,
amount and the type of laundry,
auxiliary functions selected and the
changes at the mains voltage.
Delayed start
With the Delayed Start function the startup
of the programme may be delayed up to 24
hours. Delayed start time can be increased
by increments of 30 minutes.
Do not use liquid detergents when you
set Delayed Start! There is the risk of
staining of the clothes.
C
1. Open the loading door, place the
laundry and put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Set the desired delayed start time
by pressing the Delayed Start + or -
buttons. Delayed Start symbol flashes.
4. Press Start / Pause / Cancel button.
Delayed start countdown starts.
Delayed Start symbol illuminates
steadily. Start symbol appears. “:” sign
in the middle of the delayed start time
on the display starts flashing.
4. Press Start / Pause / Cancel button to
start the programme.
Starting the programme
1. Press Start / Pause / Cancel button to
start the programme.
2. Start symbol showing the startup of the
programme will turn on.
3. Loading door is locked and Door
Locked symbol appears on the display.
4. The symbol of the step from which the
programme has started appears on the
display (Prewash, Main Wash, Rinse,
Softener and Spin).
24
EN
Progress of programme
Progress of a running programme is
indicated on the display with a set of
symbols.
Relevant symbol appears on the display
at the beginning of each programme step
and all symbols remain lit at the end of the
programme. The farthermost right symbol
indicates the current programme step.
Prewash
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to
switch the machine to pause mode. Pause
symbol appears on the display indicating
that the machine is paused. Start symbol
disappears.
If the Prewash auxiliary function is selected,
Prewash symbol appears on the display
indicating that the prewash step has
started.
F3
F1
Main Wash
Changing the speed and temperature
Main Wash symbol indicating that the main
wash step has started appears on the
display.
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
Rinse
Rinse symbol indicating that the rinsing
step has started appears on the display.
Softener
Softener symbol indicating that the softener
step has started appears on the display.
Spin
1. Press the Start / Pause / Cancel button
to switch the machine to pause mode.
The programme follow-up light of the
relevant step during which the machine
was switched into the pause mode will
Appears at the beginning of the final spin
step and remains lit during Spin and Pump
special programmes.
If the machine does not pass to the
C
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.
flash.
2. Wait until the Loading Door can be
opened.
3. Open the Loading Door and add or
take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
6. Press Start / Pause / Cancel button to
start the machine.
Door Locked symbol appears when the
loading door is locked. This symbol will
flash until the loading door becomes ready
to open when programme completes or
the machine is paused. Do not force to
open the loading door in this step. Symbol
disappears when the door is ready to open.
You can open the door when the symbol
The loading door will not open if the
C
water temperature in the machine is
high or the water level is above the
door opening.
Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
disappears.
25
EN
water level in the machine is above
the loading door opening, then turn
the Programme Selection knob
to Pump+Spin programme and
discharge the water in the machine.
You can switch on and off the
machine with On / Off button when
the Child Lock is active. When
you switch on the machine again,
programme will resume from where it
has stopped.
C
Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol
illuminates when the machine is in Rinse
Hold mode.
If you want to spin your laundry when the
machine is in this mode:
To activate the Child Lock:
Press and hold 2nd and 4th Auxiliary
Function buttons for 3 seconds. “Con”
appears on the display.
Adjust the spin speed and press Start /
Pause / Cancel button. Pause symbol
disappears and Start symbol appears.
Programme resumes, discharges the
water and spins the laundry.
If you only want to drain the water without
spinning:
Just press Start / Pause / Cancel button.
Pause symbol disappears. Start symbol
appears. Programme resumes and
discharges the water only.
Same phrase will appear on the
C
display if you press any button when
Child Lock is enabled.
To deactivate the Child Lock:
Press and hold 2nd and 4th Auxiliary
Function buttons for 3 seconds. “COFF”
appears on the display.
End of programme
“End” appears on the display at the
end of the programme. Symbols of the
programme steps remain lit. Auxiliary
function, spin speed and temperature
that were selected at the beginning of the
programme remain selected.
Do not forget to disable the child
C
lock at the end of the programme
if it was enabled before. Otherwise,
machine will not allow to select a new
programme.
Cancelling the programme
Press and hold Start / Pause / Cancel
button for 3 seconds. Start symbol
flashes. Symbol of the step at which
the programme was cancelled remains
lit. "End" appears on the display and the
programme is cancelled.
If you want to open the loading
C
door after you have cancelled the
programme but it is not possible
to open the loading door since the
26
EN
6 Maintenance and cleaning
inside of the bellow with a clean piece of
cloth after the programme has come to an
end.
Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular
intervals (every 4-5 washing cycles)
as shown below in order to prevent
accumulation of powder detergent in time.
Repeat Drum Cleaning process in every
C
2 months.
Use an anti-limescale suitable for the
washing machines.
C
After every washing make sure that no
foreign substance is left in the drum.
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
If the holes on the bellow shown in the
figure is blocked, open the holes using a
toothpick.
If more than normal amount of water
C
Foreign metal substances in your
and softener mixture starts to gather in
the softener compartment, the siphon
must be cleaned.
C
machine will cause rust stains. Clean
the stains on the drum surface by using
cleaning agents for stainless steel.
Never use steel wool or wire wool.
2. Wash the detergent drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective gloves
or use an appropriate brush to avoid
touching of the residues in the drawer
with your skin when cleaning.
3. Insert the drawer back into its place
after cleaning and make sure that it is
seated well.
Cleaning the body and
control panel
Wipe the body of the machine with soapy
water or non-corrosive mild gel detergents
as necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean
the control panel.
Cleaning the loading
door and the drum
Never use sponge or scrub materials.
These will damage the painted and
plastic surfaces.
A
Residues of softener, detergent and dirt
may accumulate in your machine in time
and may cause unpleasant odours and
washing complaints. To avoid this, use
the Drum Cleaning programme. If your
machine is not featured with Drum Cleaning
programme, use Cottons-90 programme
and select Additional Water or Extra Rinse
auxiliary functions as well. Before starting
the programme, put max. 100 g of powder
anti-limescale into the main wash detergent
compartment (compartment nr. II). If the
anti-limescale is in tablet form, put only
one tablet into compartment nr. II. Dry the
Cleaning the water intake filters
There is a filter at the end of each water
intake valve at the rear of the machine
and also at the end of each water intake
hose where they are connected to the tap.
These filters prevent foreign substances
and dirt in the water to enter the washing
machine. Filters should be cleaned as they
do get dirty.
27
EN
the water in the machine cools down.
2. Open the filter cap.
If the filter cap is composed of two
pieces, press the tab on the filter cap
downwards and pull the piece out
towards yourself.
1. Close the taps.
2. Remove the nuts of the water intake
hoses to access the filters on the water
intake valves. Clean them with an
appropriate brush. If the filters are too
dirty, take them out by means of pliers
and clean them.
If the filter cap is one piece, pull the cap
from both sides at the top to open.
3. Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly under
running water.
4. Replace the gaskets and filters carefully
in their places and tighten the hose
nuts by hand.
You can remove the filter cover by
Draining remaining water and
C
slightly pushing downwards with a thin
plastic tipped tool, through the gap
above the filter cover. Do not use metal
tipped tools to remove the cover.
3. Some of our products have emergency
draining hose and some does not have.
Follow the steps below to discharge
the water.
cleaning the pump filter
The filter system in your machine prevents
solid items such as buttons, coins and
fabric fibers clogging the pump impeller
during discharge of washing water. Thus,
the water will be discharged without any
problem and the service life of the pump
will extend.
If the machine fails to drain water, the
pump filter is clogged. Filter must be
cleaned whenever it is clogged or in every
3 months. Water must be drained off first
to clean the pump filter.
Discharging the water when the product
has an emergency draining hose:
In addition, prior to transporting the
machine (eg., when moving to another
house) and in case of freezing of the water,
water may have to be drained completely.
Foreign substances left in the pump
filter may damage your machine or may
cause noise problem.
A
a. Pull the emergency draining hose out
from its seat
In order to clean the dirty filter and
discharge the water:
1. Unplug the machine to cut off the
supply power.
b. Place a large container at the end
of the hose. Drain the water into the
container by pulling out the plug at the
end of the hose. When the container
is full, block the inlet of the hose by
replacing the plug. After the container
Temperature of the water inside the
machine may rise up to 90 ºC. To avoid
burning risk, filter must be cleaned after
A
28
EN
is emptied, repeat the above procedure
to drain the water in the machine
completely.
c. When draining of water is finished,
close the end by the plug again and fix
the hose in its place.
d. Turn the pump filter to take it out.
Discharging the water when the product
does not have an emergency draining
hose:
a. Place a large container in front of the
filter to catch water from the filter.
b. Loosen pump filter (anticlockwise) until
water starts to flow. Fill the flowing
water into the container you have
placed in front of the filter. Always keep
a piece of cloth handy to absorb any
spilled water.
c. When the water inside the machine is
finished, take out the filter completely
by turning it.
4. Clean any residues inside the filter as
well as fibers, if any, around the pump
impeller region.
5. Install the filter.
If your product has a water jet feature,
A
be sure to fit the filter into its housing
in the pump. Never force the filter
while installing it into its housing. Seat
the filter into its place completely.
Otherwise, water may leak from the
filter cap.
6. If the filter cap is composed of two
pieces, close the filter cap by pressing
on the tab. If it is one piece, seat the
tabs in the lower part into their places
first, and then press the upper part to
close.
29
EN
7 Troubleshooting
Programme cannot be started or selected.
•
Washing machine has switched to self protection mode due to a supply problem
(line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel
button for 3 seconds to reset the machine to factory settings. (See "Canceling the
programme")
Water in the machine.
•
Some water might have remained in the product due to the quality control
processes in the production. >>> This is not a failure; water is not harmful to the
machine.
There is water leaking from the bottom of the washing machine.
•
Likely problems with hoses or the pump filter. >>> Be sure the seals of the water
inlet hoses are securely fitted. Attach the hose to the tap tightly.
Pump filter might not be closed fully. >>> Make sure that the pump filter is
completely closed.
•
Machine does not fill with water.
•
•
•
•
Tap is turned off. >>> Open the inlet water taps fully.
Water inlet hose is bent. >>> Flatten the water inlet hose.
Water inlet filter is clogged. >>> Clean the water inlet filter.
The loading door is ajar. >>> Close the Loading Door.
Machine does not drain water.
•
•
Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.
Pump filter is clogged. >>> Clean the pump filter.
Machine vibrates or makes noise.
•
Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
•
A hard substance might have entered into the pump filter. >>> Clean the pump
filter.
•
•
•
Transportation safety bolts are not removed. >>> Remove the transportation
safety bolts.
Laundry quantity in the machine might be too little. >>> Add more laundry to the
machine.
Machine might be overloaded with laundry. >>> Take out some of the laundry
from the machine or distribute the load by hand to balance it homogenously in the
machine.
•
Machine might be leaning on a rigid item. >>> Make sure that the machine is not
leaning on anything.
Machine stopped shortly after the programme started.
•
Machine might have stopped temporarily due to low voltage. >>> It will resume
running when the voltage restores to the normal level.
Machine directly discharges the water it takes in.
•
Draining hose might not be at adequate height. >>> Connect the water draining
hose as described in the operation manual.
No water can be seen in the machine during washing.
The water level is not visible from outside of the washing machine. This is not a
failure.
C
30
EN
Loading door cannot be opened.
•
•
•
Door lock is activated because of the water level in the machine. >>> Drain the
water by running the Pump or Spin programme.
Machine is heating up the water or it is at the spinning cycle. >>> Wait until the
programme completes.
Child lock is engaged. Door lock will be deactivated a couple of minutes after
the programme has come to an end. >>> Wait for a couple of minutes for
deactivation of the door lock.
Washing takes longer time than the one specified in the manual.
•
Water pressure is low. >>> Machine waits until taking in adequate amount of
water to prevent poor washing quality due to the decreased amount of water.
Therefore, the washing time extends.
•
•
Voltage might be low. >>> Washing time is prolonged to avoid poor washing
results when the supply voltage is low.
Input temperature of water might be low. >>> Required time to heat up the water
extends in cold seasons. Also, washing time can be lengthened to avoid poor
washing results.
•
•
Number of rinses and/or amount of rinse water might have increased. >>>
Machine increases the amount of rinse water when good rinsing is needed and
adds an extra rinsing step if necessary.
Excessive foam might have occurred and automatic foam absorption system
might have been activated due to too much detergent usage. >>> Use
recommended amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
Programme time does not countdown. (On models with display)
•
Timer may stop during water intake. >>> Timer indicator will not countdown until
the machine takes in adequate amount of water. The machine will wait until there
is sufficient amount of water to avoid poor washing results due to lack of water.
Timer indicator will resume countdown after this.
•
•
Timer may stop during heating step. >>> Timer indicator will not countdown until
the machine reaches the selected temperature.
Timer may stop during spinning step. >>> Automatic unbalanced load detection
system might be activated due to the unbalanced distribution of the laundry in the
drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
Programme time does not countdown.
•
There might be an imbalance of laundry in the machine. >>> Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
31
EN
Machine does not switch to spinning step.
•
There might be an imbalance of laundry in the machine. >>> Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
The machine will not spin if water is not drained completely. >>> Check the filter
and the draining hose.
Excessive foam might have occurred and automatic foam absorption system
might have been activated due to too much detergent usage. >>> Use
recommended amount of detergent.
C
•
•
Washing performance is poor: Laundry turns gray.
•
Insufficient amount of detergent was used over a long period of time. >>> Use
the recommended amount of detergent appropriate for water hardness and the
laundry.
•
•
Washing was made at low temperatures for a long time over a long period of time.
>>> Select the proper temperature for the laundry to be washed.
Insufficient amount of detergent is used with hard waters. >>> Using insufficient
amount of detergent with hard water causes the soil to stick on the cloth and this
turns the cloth into gray in time. It is difficult to eliminate graying once it happens.
Use the recommended amount of detergent appropriate for water hardness and
the laundry.
•
•
Too much detergent is used. >>> Use the recommended amount of detergent
appropriate for water hardness and the laundry.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Stains persist or the laundry is not whitened.
•
•
•
•
•
•
Insufficient amount of detergent is used. >>> Use recommended amount of
detergent appropriate for the laundry.
Excessive laundry was loaded in. >>> Do not load the machine in excess. Load
with amounts recommended in the "Programme and consumption table".
Wrong programme and temperature were selected. >>> Select the proper
programme and temperature for the laundry to be washed.
Wrong type of detergent is used. >>> Use original detergent appropriate for the
machine.
Detergent is put in the wrong compartment. >>> Put the detergent in the correct
compartment. Do not mix the bleaching agent and the detergent with each other.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Oily stains appeared on the laundry.
•
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Clothes smell unpleasantly.
•
Odours and bacteria layers are formed on the drum as a result of continuous
washing at lower temperatures and/or in short programmes. >>> Leave the
detergent drawer as well as the loading door of the machine ajar after each
washing. Thus, a humid environment favorable for bacteria cannot occur in the
machine.
•
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
32
EN
Colour of the clothes faded.
•
•
Excessive laundry was loaded in. >>> Do not load the machine in excess.
Detergent in use is damp. >>> Keep detergents closed in an environment free of
humidity and do not expose them to excessive temperatures.
•
•
A higher temperature is selected. >>> Select the proper programme and
temperature according to the type and soiling degree of the laundry.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
It does not rinse well.
•
The amount, brand and storage conditions of the detergent used are
inappropriate. >>> Use a detergent appropriate for the washing machine and
your laundry. Keep detergents closed in an environment free of humidity and do
not expose them to excessive temperatures.
Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
•
•
•
Pump filter is clogged. >>> Check the filter.
Drain hose is folded. >>> Check the drain hose.
Laundry became stiff after washing.
•
Insufficient amount of detergent is used. >>> Using insufficient amount of
detergent for the water hardness can cause the laundry to become stiff in time.
Use appropriate amount of detergent according to the water hardness.
Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
•
•
•
Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Laundry does not smell like the softener.
•
Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Wash and clean the dispenser with
hot water. Put the detergent in the correct compartment.
•
•
Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
33
EN
Detergent residue in the detergent drawer.
•
Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in
detergent.
•
Detergent has gotten damp. >>> Keep detergents closed in an environment free
of humidity and do not expose them to excessive temperatures.
Water pressure is low. >>> Check the water pressure.
The detergent in the main wash compartment got wet while taking in the prewash
water. Holes of the detergent compartment are blocked. >>> Check the holes
and clean if they are clogged.
There is a problem with the detergent drawer valves. >>> Call the Authorized
Service Agent.
Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
•
•
•
•
•
There is detergent left on the laundry.
•
Excessive laundry was loaded in. >>> Do not load the machine in excess.
Wrong programme and temperature were selected. >>> Select the proper
programme and temperature for the laundry to be washed.
Wrong detergent was used. >>> Select the proper detergent for the laundry to be
washed.
•
•
•
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Too much foam forms in the machine.
•
•
•
•
•
•
•
Improper detergents for the washing machine are being used. >>> Use
detergents appropriate for the washing machine.
Excessive amount of detergent is used. >>> Use only sufficient amount of
detergent.
Detergent was stored under improper conditions. >>> Store detergent in a closed
and dry location. Do not store in excessively hot places.
Some meshed laundry such as tulle may foam too much because of their texture.
>>> Use smaller amounts of detergent for this type of item.
Detergent is put in the wrong compartment. >>> Put the detergent in the correct
compartment.
Softener is being taken early. >>> There may be problem in the valves or in the
detergent dispenser. Call the Authorized Service Agent.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Machine does not start. Nothing appears on the display.
Machine may be unplugged. >>> Check the plug and attach it to the socket.
Fuse may be defective. >>> Check household fuse/Circuit Breaker/Earth Leakage
Power may be out. >>> Check if there is any power outage.
On / Off button might not be pressed. >>> Press On / Off button.
Machine does not start when Start / Pause / Cancel button is pressed after selecting
the programme.
Loading door may be open. >>> Close the loading door.
Rinse symbol flashes in the display. (No Water symbol may also be lit depending on
the model of your machine).
Water may be cut off. >>> Make sure that the water is not cut off and press Start /
Pause / Cancel button again to start your machine.
Foam is overflowing from the detergent drawer.
•
Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and
pour into the main wash compartment of the detergent drawer.
Put detergent into the machine suitable for the programmes and maximum loads
indicated in the “Programme and consumption table”. When you use additional
chemicals (stain removers, bleaches and etc), reduce the amount of detergent.
C
Laundry remains wet at the end of the programme
•
Excessive foam might have occurred and automatic foam absorption system might
have been activated due to too much detergent usage. >>> Use recommended
amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
If you cannot eliminate the problem although you follow the instructions in this section,
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional
product yourself.
A
36
EN
|