Audiovox Rampage ACC 60 User Manual

OWNER'S MANUAL  
SEL  
LOUD  
PWR  
REL  
4x40 WATTS  
1
2
CDC  
TUNE  
TRK  
3
U
AS/PS  
L
M
5
O
E
DISC  
V
5
DISC  
SEL  
4
+
ACC-60  
BAND  
6MEM  
SCN  
RPT  
RDM  
PGM  
T/F  
1
2
3
4
5
CLR  
AUX  
MO/AUX  
ACC-60  
AM/FM/MPX RADIO  
WITH  
FOLD-DOWN DETACHABLE FRONT PANEL,  
5-DISC COMPACT DISC PLAYER  
AND QUARTZ CLOCK  
TOLL-FREE INSTALLATION ASSISTANCE  
The installation and wiring connections for this unit are so simple, we doubt you'll need our help, but, if you  
do, we're here to help you. Just call our toll-free telephone assistance line at 1-800-645-4994 during the days  
and hours shown (U.S.A. and Canada only).  
TIME ZONE  
DAY  
PACIFIC  
MOUNTAIN  
CENTRAL  
EASTERN  
MON.-FRI.  
SATURDAY  
8:30AM - 7PM  
9AM - 5PM  
7:30AM - 6PM  
8AM - 4PM  
5:30AM - 4PM  
6AM - 2PM  
6:30AM - 5PM  
7AM - 3PM  
UNIVERSAL INSTALLATION USING MOUNTING SLEEVE  
SLEEVE  
ADAPTER  
FASTEN THIS END TO SECURE  
PART OF DASHBOARD  
PERFORATED  
SUPPORT STRAP  
BOLT  
(M4 X 8 MAX)  
FASTEN THIS END TO BOLT HOLE  
IN REAR CENTER OF CHASSIS  
HALF-SLEEVE  
BEND BOTTOM  
TABS DOWNWARD  
BEND TOP  
TABS UPWARD  
DASHBOARD  
SLEEVE  
ADAPTER  
(REF)  
2
HALF-SLEEVE  
(REF)  
1. SLIDE RADIO INTO HALF-SLEEVE.  
2. SECURE TO STRAP USING BOLT IF POSSIBLE.  
3. REINSTALLANY ITEMS YOU REMOVED FROM THE DASHBOARD.  
ISO-DIN FINAL INSTALLATION  
1. REMOVE TRIM RING FROM FRONT OF RADIO.  
2. MOUNT FACTORY BRACKETS ON NEW RADIO  
USING EXISTING SCREWS FROM OLD RADIO.  
3. SLIDE RADIO AND FRAME INTO DASH OPENING  
AND SECURE.  
4. INSTALL DASH PANELS PREVIOUSLYREMOVED.  
3
RADIO WIRING  
REFER TO PAGE 5 FOR SPEAKER WIRING  
4
SPEAKER WIRING  
REFER TO PAGE 4  
FOR RADIO WIRING  
WARNING!  
! NEVERCOMBINE(BRIDGE)OUTPUTSFORUSEWITH1SPEAKER.  
! NEVERGROUNDNEGATIVESPEAKERLEADSTOCHASSISGROUND.  
! FAILURETOWIREEXACTLYASSHOWNBELOWMAYCAUSEELECTRICALDAMAGETO  
THERADIO.  
5
3,4,5,6,7,8  
16,32  
10,18,19  
28,29  
1
17  
13,14,15  
31  
33  
SEL  
PWR  
LOUD  
REL  
4x40 WATTS  
2
9
11  
30  
1
2
CDC  
TUNE  
TRK  
3
U
AS/PS  
L
M
5
O
E
DISC  
V
5
DISC  
SEL  
4
+
ACC-60  
BAND  
SCN  
RPT  
RDM  
PGM  
5
T/F  
1
2
3
4
6MEM  
CLR  
AUX  
27  
20 21 22 23 25  
12  
26  
24  
control. Pressing the Select button once will set  
the unit for volume adjustment (VOL will mo-  
mentarily appear on the display panel, followed  
a few seconds later by V -- and the setting num-  
ber). Pressing the button additional times will  
select bass adjustment (BAS on display panel),  
treble adjustment (TRE), balance (BAL), fader  
(FAD), and volume (VOL) again. The display will  
return to the normal indication 5 seconds after  
the last adjustment or when another function is  
1
POWER (PWR) BUTTON  
Press this button to turn the unit on and off.  
When the ignition switch is on, the radio will  
turn on automatically when the CDC, BAND  
or AUX button is pressed.  
2
VOLUME CONTROL  
To increase the volume level, rotate the  
VOLUME control in the clockwise direction.  
The volume will increase and the level will  
be shown on the display panel from a  
minimum of V -0 to a maximum of V -46  
To decrease the volume level, rotate the con-  
trol in the counterclockwise direction. The  
display will automatically return to the nor-  
mal indication 5 seconds after the last vol-  
ume adjustment or when another function  
is activated. This control is also used in  
conjunction with the SEL/LOUD button to  
activated. Refer to paragraph  
8
for the LOUD  
f4unction of this button.  
BASS CONTROL  
To adjust the bass level, first select the Bass  
mode by pressing the SEL/LOUD button until the  
BAS indication appears on the display panel.  
Within 5 seconds of choosing the Bass mode,  
rotate the VOLUME Control to adjust the bass  
response as desired. The bass level will be  
shown on the display panel from a minimum  
of B -6 to a maximum of B +6 (B 0 represents flat  
response). The display will automatically return  
to the normal indication 5 seconds after the last  
adjustment or when another function is  
activated.  
levels as described in  
SELECT (SEL)/LOUD BUTTON  
adjust the bass, treb4le, b5alanc6e a7nd fader  
.
3
This button is used to select the audio  
function (volume, bass, treble, balance or  
fade) to be adjusted using the VOLUME  
6
compensate for the characteristics of hu-  
man hearing. Press and hold the SEL/  
LOUD button for at least 2 seconds to acti-  
vate this feature as indicated by LOUD on  
the display panel. Pressing the button  
again for 2 seconds will de-activate the  
function and LOUD will disappear from  
the display.  
5
TREBLE CONTROL  
To adjust the treble level, first select the Treble  
mode by pressing the SEL/LOUD button until  
the TRE indication appears on the display  
panel. Within 5 seconds of choosing the  
Treble mode, rotate the VOLUME control to  
adjust the treble response as desired. The treble  
level will be shown on the display panel from a  
minimum of T -6 to a maximum of T +6 (T 0  
represents flat response). The display will auto-  
matically return to the normal indication 5  
seconds after the last adjustment or when  
another function is activated.  
9
AM/FM BAND SELECTOR  
During radio play, each time the button is  
pressed, the radio band changes. The  
indications AMI, AMII, FMI, FMII, or FMIII  
will appear on the display panel accord-  
ing to your selection.  
6
LEFT/RIGHTBALANCECONTROL  
To adjust the left-right speaker balance, first select  
the Balance mode by pressing the SEL/LOUD but-  
ton until the BAL indication appears on the display  
panel. Within 5 seconds of choosing the Balance  
mode, rotate the VOLUME control clockwise to ad-  
just it to the right channel speakers, or counterclock-  
wise to adjust it to the left channel speakers. The  
balance position will be shown on the display panel  
from L 12 (full left) to R 12 (full right). When the  
volume level between the left and right speak-  
ers is equal, C 00 will be shown on the display  
panel. The display will automatically return to  
the normal indication 5 seconds after the last ad-  
justment or when another function is activated.  
During CD play, pressing this button will  
change to radio operation without ejecting the  
disc.  
bl  
UP/DOWN TUNING (  
(TRK)SELECTION  
/
)/CD TRACK  
During radio operation, each time the Up  
TUNE button ( )is pressed, the radio will  
tune two frequency steps higher. Similarly,  
each press of the Down TUNE button (  
)
will tune two frequency steps lower. Press-  
ing either button for longer than 1 second  
and then releasing will activate the auto-  
matic seek tuning function, whereby the ra-  
dio will seek the next station in the selected  
direction and stop and remain at that fre-  
quency.  
7
FRONT/REARFADERCONTROL  
To adjust the front-rear speaker balance, first  
select the Fader mode by pressing the SEL/  
LOUD button until the FAD indication appears on Pressing and holding either button for longer  
the display panel. Within 5 seconds of choosing  
the Fader mode, rotate the VOLUME control clock-  
wise or counterclockwise to adjust the front-rear  
speaker levels as desired. The fader position will  
be shown on the display panel from F 12 (full front)  
to R 12 (full rear). When the volume level between  
the front and rear speakers is equal, C 00 will  
appear on the display panel. The display will auto-  
matically return to the normal indication 5 sec-  
onds after the last adjustment or when an-  
other function is activated.  
than 1 second will cause the radio to con-  
tinue tuning rapidly in the selected di-  
rection until the next available station and  
momentarily stop there. Tuning will continue  
unless the button is released at the desired  
station.  
During CD player operation, these buttons  
are used to select a desired track on the  
disc. (Refer to Track Select.)  
bm  
AUTO-STORE TUNING (AS)  
PRE-SET SCAN TUNING (PS)  
7
8
LOUDNESS CONTOUR (LOUD)  
When listening to music at low volume levels, this  
feature will boost the bass and treble ranges to  
Press this button momentarily to scan  
the 6 stations in the pre-set memories of  
the band in use. The unit will stop at each  
pre-set station for 10 seconds before continu-  
ing to the next pre-set station (the frequency  
on the display panel will flash during Pre-Set  
Scan operation). Press the button again  
momentarily to stop Pre-Set Scan operation  
and remain on the selected frequency.  
fortable listening, the stereo indication will ap-  
pear intermittently or not at all; if an AM or monau-  
ral signal is received, the  
icon will disappear  
from the display panel.  
bp  
LIQUID CRYSTAL DISPLAYPANEL  
The Liquid Crystal Display (LCD) panel displays  
the frequency, time, and activated functions.  
Pressing the button for longer than 2 sec-  
onds will activate the Auto-Store Tuning fea-  
ture. The radio will automatically scan the band  
in use and enter strong local stations into  
the pre-set memory positions for that  
band. LOC will appear on the display as  
tuning occurs. If you have already set the  
pre-set memories of that band to your favor-  
ite stations, activating the Auto-Store Tun-  
ing feature will erase those stations and  
enter the new stronger stations. This fea-  
ture is most useful when traveling in a new  
area where you are not familiar with the lo-  
cal stations.  
NOTE: It is a characteristic of LCD panels that, if  
subjected to cold temperatures for an  
extended period of time, they may take  
longer to illuminate than under normal  
conditions. In addition, the visibility of  
the numbers on the LCD may slightly  
decrease. The LCD readout will return  
to normal when the temperature increases  
to a normal range.  
bq  
FUNCTION DISPLAY  
The Function Display consists of a single bar  
graph which displays a bar graph which provides  
a visual representation of the audio signal power  
level. As the volume is increased, the number of  
illuminated segments will increase.  
bn  
STATION PRE-SET MEMORIES  
To manually set any of the 6 pre-set memory  
buttons, use the following procedure:  
br  
DISC SLOT  
1. Turn the unit on and select the desired band.  
2. Select the first station to be pre-set  
using the TUNE/TRK buttons.  
3. Press and hold the pre-set button to  
be set for approximately 2 seconds.  
The pre-set number CH 1-6 will appear  
on the display, indicating the station is  
now set into the memory position of that  
pre-set button and can be recalled at any  
time by momentarily pressing that button.  
With the label surface facing up, gently insert each  
disc into the slot until the soft-loading mecha-  
nism engages and draws the disc into the player.  
The number of discs loaded will appear both on the  
front panel display disc icon (flashing white segment)  
and on the DISC INF display on the rear of the front  
panel. The discs will be loaded in order beginning  
with the number (1-5) currently displayed. Disc play  
will begin when the CDC button is pressed; and play  
will start with track 1 on the last disc loaded, unless  
another disc is selected using the DISC SEL  
button on the front side of the panel.  
4. Repeat the above procedure for the  
remaining 5 pre-sets on the band in use  
NOTE: This unit is designed for play of standard  
5" (12cm) Compact Discs ONLY. Do not  
attempt to use 3" (8cm) CD-Singles in  
this unit, either with or without an adap-  
ter, as damage to the player and/or disc  
can occur. Such damage will not be cov-  
) on the dis-  
ered by the Warranty on this product.  
boand for the other 4 bands of the unit.  
FMSTEREO/LOCAL(LOC)INDICATIONS  
The unit receives both stereo and monaural  
signals. During FM radio operation, the unit  
is usually receiving a stereo signal as indi-  
8
cated by the stereo icon (  
play. If a stereo signal is too weak for com-  
bs  
CD PLAY/PAUSE SELECTOR (CDC/ II )  
the display panel). Play of the track will con-  
tinue to repeat until the button is pressed  
again and the RPT indication disappears  
from the display panel. Repeat Play mode  
will also be canceled by activating the Track  
Scan or Random Play functions.  
When listening to the radio with a disc loaded in  
1
2
3
the unit (  
5
icon disc number segment illumi-  
4
nated on the display panel), press this button to  
return to disc play mode from the beginning of the  
last track in play.  
During disc play, press this button to temporarily  
stop play of the disc (PAUS will appear on the  
display panel). Press the button again to resume  
play from the point at which it was stopped. Pause  
mode will also be canceled by activating any other  
disc function.  
cn  
REPEATA- B SELECTOR (RPTA-B)  
The Repeat A - B function is used to select a  
section of the disc other than a complete  
track to be repeated. Press and hold the  
button at the beginning of the section that  
you wish to have repeated (RPT and A will  
appear on the display panel). Allow the disc  
to play to the end of the section that you  
wish to have repeated and then press and  
hold the button again (the A on the dis-  
play panel will change to a b). The selected  
section will be played repeatedly until the  
function is canceled by pressing the RPT  
A-B button again or activating any other  
disc function.  
bt  
TRACK (TRK) SELECT (  
/
)
The Track Select functions are used to quickly  
access the beginning of a particular track. Each  
time the Forward Track Select (  
pressed, the next higher track number will be  
selected as shown on the display panel. Simi-  
larly, each time the Backward Track Select (  
) button is  
)
button is pressed, the next lower track number  
will be selected as shown on the display panel.  
co  
RANDOM PLAY SELECTOR (RDM)  
bu  
CUE/REVIEW FUNCTIONS (  
High-speed audible search to any section of the  
disc can be made by the Cue and Review  
/
)
During disc play, press this button to play the  
tracks on the disc in a random shuffled order  
(RDM will appear on the display panel). In  
Random Play mode, the Forward Track  
functions. Press and hold the Cue button (  
)
Select (  
random order instead of the normal progres-  
) to advance rapidly in the  
) will also select tracks in the  
to advance rapidly in the forward direction or  
the Review button (  
sion. Backward Track Select (  
) will go  
backward direction. During either function, the  
elapsed time within each track will automatically  
be shown on the display panel.  
back to the beginning of the track in play if it  
has played longer than 5 seconds or to a  
random track if it has played less than 5  
seconds. The Random Play mode can be  
canceled by pressing the button again  
( RDM indication will disappear from the  
display panel).  
cl  
TRACK SCAN SELECTOR (SCN)  
During disc play, press this button to play the first  
10 seconds of each track on the disc in play (SCN  
will appear on the display panel and the track num-  
ber will flash). When a desired track is reached,  
press the Track Scan button again to cancel the  
function and play of the selected track will con-  
tinue. Track Scan mode will also be canceled by  
activating the Repeat Play or Random Play func-  
tions.  
cp  
MEMORY/CLEARSELECTOR(MEM/CLR)  
Up to 18 tracks can be programmed for play  
in any order you select. The following pro-  
cedure is used to program the order of track  
play:  
cm  
TRACKREPEATPLAYSELECTOR(RPT)  
9
1. Select a disc in the unit to begin disc play.  
2. Select the first track to be programmed  
using the Track Select buttons  
During disc play, press this button to repeat the  
play of the selected track (RPT will appear on  
(TUNE/TRK) and press the MEMory  
Selector button. The indication M - 01  
will momentarily appear on the display  
panel, indicating that the selected  
track has been entered as the first one  
to be played in Programmed Play  
mode.  
panel). PGM will disappear from the display panel,  
M --- CL will appear momentarily, and the pro-  
gram will be erased. The Programmed Play  
memory will also be cleared automatically when  
the disc(s) is ejected.  
NOTE: Program Play memory will be maintained  
if the disc is left in the player when the  
unit is shut off.  
3. Select the second track to be pro-  
grammed (this could be on another disc)  
using the Track Select button and then  
press the Memory Selector button. M -02  
will appear on the display, and the  
selected track has been entered as  
the second one to be played in Programmed  
Play mode.  
4. In similar manner, continue selecting  
other tracks (up to a maximum of 18) to  
be played in programmed order. The  
indication FULL will appear on the  
display panel if attempting to program  
more than 18 selections.  
crDISC SELECT (DISC SEL) BUTTON  
When this button is pressed during disc play, the  
next CD in order is selected for play. The selected  
DISC segment number (1-5) is highlighted on the  
1
2
front panel disc icon (  
3
) and flashes while play  
5
4
is active. The segment number also flashes dur-  
ing radio operation if the disc(s) is still installed.  
cs  
AUXILIARY (AUX) BUTTON  
If an portable audio device, is connected to the  
Left and Right auxiliary input jacks, this source  
can be selected for play through the radio by  
pressing the AUX button. When the button is  
pressed, A --in appears on the display panel.  
When the auxiliary input is being used, no other  
audio input sources (radio or CD) are operational.  
cq  
PROGRAMMEDPLAYSELECTOR(PGM)  
To play the tracks in the selected order after  
programming is completed, press the Pro-  
grammed Play button so that the PGM indi-  
cation appears on the display panel. Play  
will begin of the first track selected in  
the programmed order. During Pro-  
grammed Play mode, the Track Select func-  
tions will operate in the programmed order  
instead of the normal progression. Track  
Scan and Track Repeat can be selected  
during Programmed Play and will operate  
on the programmed tracks.  
ctPANEL DISC SELECT (DISC SEL) BUTTON  
The back of the front panel contains a DISC SEL  
button which is used in conjunction with the disc  
number LCD and Disc Eject ( ) button to select  
a particular CD you wish to remove and/or replace.  
When the DISC SEL button is pressed, the disc  
number display to the left sequences through  
discs 1-5. Stop at the number disc you wish to  
eject and press the eject button. The selected disc  
will be ejected.  
cu  
DISC EJECT (  
)
To de-activate Programmed Play and return  
to play of all tracks on the disc in normal  
order, press the Programmed Play button  
again so that the PGM disappears from the  
display panel. Activating the Cue/Review  
functions or the Random Play mode will  
also cancel Programmed Play mode.  
Clearing Programmed Play Memory: To clear  
the Programmed Play memory, press the  
Memory Clear button at any time during Pro-  
grammed Play mode (PGM on display  
Disc play is stopped; the disc currently selected  
for play is ejected and the unit will revert to radio  
operation by pressing this button (EJT will briefly  
appear on the display panel). When the disc is  
ejected, no cd appears on the display; press BAND to  
return to radio operation. The disc must be removed  
from the unit or be reloaded. Pressing the Disc  
Eject button for at least 2 seconds will eject all  
discs from the unit in sequence, beginning with  
the disc currently in play.  
10  
dl  
TIME/FREQUENCYDISPLAYSELECTOR(T/F)  
do  
FRONT PANELRELEASE (REL) BUTTON  
Press this button to call the time display on the  
incorporated quartz clock. Press the button again  
to return to radio frequency or disc display, or it  
will return automatically after 5 seconds.  
This button is used to release the mecha-  
nism that holds the front panel to the chas-  
sis. To detach the front panel, press the but-  
ton; the panel will fold down to the horizontal  
position. At the center of the panel, press the  
release clip to disengage the panel from the  
mounting plate, and pull the panel straight  
out until it clears the mounting plate guides.  
To re-attach the panel, position the panel so  
both sides engage the mounting plate guides;  
then slide the panel home until the mecha-  
nism locks it into place in the mounting plate.  
dm  
THEFT-DETERRENT LED  
A light-emitting diode (LED) with lens is mounted  
on the front of the chassis behind the panel mount-  
ing plate; the LED will flash at 1-second intervals  
when the panel folds down, and will flash at 2-  
second intervals when the panel is removed from  
the radio. The flashing light serves as both a  
visual reminder that the panel has been released,  
or as a warning to a would-be thief that the unit  
has been disabled by removal of the front panel.  
NOTES ON USE OF FRONT PANEL  
1. Make sure the front panel is right-side-up  
when attaching it to the chassis as it  
cannot be attached when up-side down.  
2. Do not press very hard on the front panel  
when attaching it to the chassis. No  
more than light to moderate pressure  
should be needed.  
dn  
RESET BUTTON  
A RESET button is accessible on the rear of the front  
panel when it is in the fold-down position. The reset  
circuitry is provided to protect the microproces-  
sor circuitry and should only be activated un-  
der the following circumstances.  
1. Upon initial installation after all wiring is  
completed.  
2. If there is a malfunction of any of the  
switches on the unit or of the CD player,  
pressing the RESET button may clear the  
system and return the unit to normal op-  
eration.  
3. When attaching the front panel, make  
sure the right side is correctly engaged  
before pressing the left side to lock it into  
position.  
4. When taking the front panel with you,  
please use the supplied carrying case  
to protect the panel from dirt and damage.  
CAUTION: Pressing the RESET button will cause  
all discs to be ejected. When the RESET button  
is pressed be certain that the front panel is in the  
down position.  
PANELMOUNTING  
PLATE  
DISC SLOT  
THEFT DETERRENT  
LED  
MOUNTING PLATE  
GUIDE (2 PLACES)  
DISC SELECT  
(DISC SEL)  
BUTTON  
PANELRELEASE  
CLIP (PRESS TO  
REMOVE PANEL  
FROM MOUNTING  
PLATE)  
CD EJECT  
11  
(
) BUTTON  
RESET BUTT
FRONT PANEL  
CT  
(32)  
SETTING THE CLOCK  
1. Switch the vehicle ignition “on” and the radio “on” (radio frequency or disc  
track number will be shown on the display panel).  
2. Press and hold the time button (T/F) approximately 2 seconds  
until the time display appears with AM or PM and the colon ( : ) flashing. Release  
the T/F button.  
3. Press the Down Tuning button ( ) to adjust the hours and the AM/PM indication,  
and the Up Tuning button (  
) to adjust the minutes to the correct time.  
4. When the correct time is shown on the display panel, wait 5 seconds for the  
display to return to the normal indication.  
ERROR CODES  
If a problem should develop while operating the CD player, the following error codes  
may be displayed on the display panel:  
INF-1: Indicates mechanical malfunction. Press the Reset button dn.  
INF-2: Indicates mechanical malfunction. Press the Reset button dn.  
INF-3: Indicates mechanical malfunction. Press the Reset button dn.  
INF-4: Indicates disc focus error. Press the Reset button dn.  
INF-5: Indicates disc focus error. Press the Reset button dn.  
INF-6: Indicates mechanical malfunction. Press the Reset button dn.  
INF-7: Indicates data error. Press the Reset button dn.  
INF-8: Indicates disc reading error. Eject the disc, make sure  
it is clean, undamaged, and loaded correctly (label side up). Re-load the  
disc and check for proper operation or try another disc.  
INF-9: Indicates disc lever error. Press eject button.  
If the suggested measures do not solve the problem, contact an approved warranty  
station near you for further assistance.  
12  
SPECIFICATIONS  
Size:  
7" W x 2" H x 6-1/4" D  
178 mm x 50 mm x 160 mm  
Operating Voltage:  
Output Power:  
12 volts DC, negative ground  
160 watts maximum  
(40 watts x 4 channels)  
Output Wiring:  
Floating-ground type designed for 4 speaker use.  
Front and rear channels CANNOT be combined  
(bridged) for use with 2 speakers.  
RCA low-level outputs (rear channels).  
Output Impedance:  
Low-Level Output:  
Tuning Range:  
Compatible with 4-8 ohm speakers.  
2.0 Volts (2000 mv)  
AM: 530-1,720 kHz. (10 kHz. step)  
FM: 87.5-107.9 MHz. (200 kHz. step)  
Sensitivity:  
AM: 20 uV.  
FM: 3.0 uV.  
FM Stereo Separation:  
CD Frequency Response:  
CD Signal/Noise Ratio:  
CD Channel Separation:  
CD Distortion:  
30 dB  
20-20,000 Hz. ±1 dB  
70 dB  
60 dB  
0.10%  
*Specifications are subject to change without notice.  
13  
CARE AND MAINTENANCE  
The radio section of your new sound system does not require any maintenance. We  
recommend that you keep this manual for reference on the many features found in this unit as  
well as how to set the clock.  
The compact disc player section also requires no routine maintenance, but proper  
understanding of its use and handling will help you obtain maximum enjoyment of its  
capabilities. The following points should be observed:  
! When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit.  
! The CD player is a precision instrument and will not operate properly in extreme heat or cold.  
In case of such conditions, wait until the interior temperature of the vehicle reaches a normal  
temperature before using the player.  
! If the temperature inside the player gets too hot, a protective circuit will automatically stop  
play of the disc. In this case, allow the unit to cool off before operating the player again.  
! Never insert anything other than 5" (12 cm) compact discs into the player as the  
mechanism can be damaged by foreign objects.  
! Do not attempt to use 3" (8 cm) CD-Single discs in this unit, either with or without an adaptor,  
as damage to the player and/or disc may occur. Such damage will not be covered by the  
Warranty on this product.  
! When not using the disc player, always remove the compact disc. Do not leave an ejected  
disc sitting in the disc slot as this can expose it to sunlight and other causes of damage.  
! Do not attempt to open the unit chassis. There are no user serviceable parts or adjustments inside.  
! When the vehicle warms up during cold weather or under damp conditions, moisture may  
condense on the lens of the disc player. Should this occur, the player will not operate properly  
until the moisture has evaporated.  
! The unit is designed with a vibration dampening CD mechanism to minimize interruption of  
disc play due to normal vibration in a moving vehicle. When driving on very rough roads,  
however, occasional sound skips may occur. This will not scratch or damage the disc and  
normal play will resume when the rough conditions cease.  
HANDLING COMPACT DISCS  
Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of sound  
quality. Please follow these guidelines to take care of your compact discs:  
! Use only compact discs with the mark  
! Fingerprints, dust, and dirt should be carefully wiped off the disc’s playing surface (shiny side)  
with a soft cloth. Wipe in a straight motion from the inside to the outside of the disc.  
! Never use chemicals such as record sprays, household cleaners or thinner to clean compact  
discs. Such chemicals can irreparably damage the disc’s surface.  
! Discs should be kept in their storage cases when not in use.  
! Do not expose discs to direct sunlight, high temperatures or high humidity for extended periods.  
! Do not stick paper, tape, or labels on the disc surfaces nor write on them with any type of marker.  
14  
12 MONTH LIMITED WARRANTY  
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser  
of this product that should this product or any part thereof, under normal use and  
conditions, be proven defective in material or workmanship within 12 months from the  
date of original purchase, such defect(s) will be repaired or replaced with new or  
reconditioned product (at the Company's option) without charge for parts and repair  
labor.  
To obtain repair or replacement within the terms of this Warranty, the product is to be  
delivered withproofofwarrantycoverage(e.g.dated billofsale),specificationofdefect(s),  
transportation prepaid, to the warranty center at the address shown below.  
ThisWarrantydoesnotextendtotheeliminationofcarstaticormotornoise,tocorrection  
of antenna problems, to costs incurred for installation, removal, or reinstallation of the  
product,ordamagetotapes,compactdiscs,speakers,accessories,orvehicleelectrical  
systems.  
This Warranty does not apply to any product or part thereof which, in the opinion of the  
Company, has suffered or been damaged through alteration, improper installation,  
mishandling,misuse,neglect,accident,orbyremovalordefacementofthefactoryserial  
number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER  
THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED  
ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED  
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  
SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY  
ACTION FOR BREACH OF ANY WARRANTYHEREUNDERINCLUDINGANYIMPLIED  
WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30  
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE  
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES  
FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,  
WHATSOEVER. NopersonorrepresentativeisauthorizedtoassumefortheCompany  
any liability other than expressed herein in connection with the sale of this product.  
Some states do not allow limitations on how long an implied warranty lasts or the  
exclusion or limitation of incidental or consequential damage so the above limitations or  
exclusions may not apply to you. This Warranty gives you specific legal rights and you  
may also have other rights which vary from state to state.  
U.S.A.: AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 • 1-800-645-4994  
CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA  
15  
FormNo.128-4270E  
16  
© 2001 Audiovox Electronics Corp., Hauppauge, NY 11788  
Printed in China  
16  
128-6158  
128-6158  
16 of 20  

Alpine Electronics Car Stereo System CDE 102E User Manual
Black Decker FP1445C User Manual
Black Decker FX350B User Manual
Bose Bluetooth CINEMATE1SR User Manual
Canon EOS 7D HDMI User Manual
Creative Labs Car Stereo System TX FM User Manual
Eclipse Fujitsu Ten CD3404 User Manual
HP (Hewlett Packard) PhotoSmart User Manual
hussman Corp Carrying Case DCSG User Manual
JVC CD RECEIVER KD LHX501 User Manual